We are not the manufacturer, authorised distributor or authorised representative of the Aventics (brand of Emerson) brand Worldwide. The private labels and part numbers shown on this website are the property of their respective owners.
Manufacturer
Aventics (brand of Emerson)
Country
Germany
Part number
R404008517
Description
Functional principle | double-acting |
Cushioning | elastic |
Magnetic piston | with magnetic piston |
Piston diameter | 20 mm |
Piston rod thread | M8 |
Standardization | ISO 6432 |
Stroke | 320 mm |
Sealing material | Acrylonitrile butadiene rubber |
Scraper | Polyurethane |
Corrosion resistance | corrosion-resistant |
Compressed air connection | G 1/8 |
Compressed air connection type | Internal thread |
Stock availability:
On request
If you are questing Aventics (brand of Emerson) R404008517, communicate with FAMAGA, the world's main supplier of machine made equipment. Our company has operated for more than ten years - these are ages of experience, which are illustrated in the quality of products and special attention to each purchaser. We esteem everyone, who joined with us - therefore, our regular purchasers accept the most favorable purchase terms and discounts on the factory-made equipment market. Nowadays, there are more than 4000 such purchasers, and we constantly arrange new agreements. More than 700 proceedings are resolved per day, because FAMAGA supplies all over the planet Germany, United Kingdom, Romania, Nepal, Luxembourg, Sierra Leone, Israel, Croatia, Russia, South Sudan, Mongolia, Colombia, El Salvador, Eritrea, Niger, Brunei, The Bahamas, Georgia, Haiti, Tanzania, Panama, Sweden, Monaco, Kuwait, Liechtenstein, Guatemala, Chile, Jamaica, Vietnam, East Timor, Azerbaijan, Afghanistan, New Zealand, Pakistan, Egypt, The Gambia, Jordan, United States, Eswatini, United Arab Emirates, Belarus, Djibouti, Comoros, Armenia, Bolivia, Samoa. A advanced logistics connection and a partnership network guide us to ship our units anywhere in the world with no delay without compromising product quality.
A particular source of dignity for FAMAGA is its personnel, each of whom contributes to our work. We invite into our team only experts, who already have experience in the direction of manufacturing equipment.
All products from FAMAGA are verified - we are responsible for the outcome of our work. At the moment, more than 10 million units of products have been supplied, and this number is rising every day. We are happy that clients choose FAMAGA again and again, and we are happy to make more advanced and technologically developed industrial equipment so as stay in control.
To get some advice or make a request, phone us or write a message to the online chat on our official website. You can also send a list of the required equipment to the email of corporation - we will contact you ourselves with a ready-made commercial proposal from FAMAGA.
Standards | ISO 6432 |
Compressed air connection | Internal thread |
Working pressure min./max. | 1 ... 10 bar |
Ambient temperature min./max. | -20 ... 70 °C |
Medium temperature min./max. | -20 ... 70 °C |
Medium | Compressed air |
Max. particle size | 50 µm |
Oil content of compressed air | 0 mg/m³ |
Pressure for determining piston forces | 6.3 bar |
The pressure dew point must be at least 15 °C under ambient and medium temperature and may not exceed 3 °C . The oil content of compressed air must remain constant during the life cycle. Use only the approved oils from AVENTICS. Further information can be found in the “Technical information” document (available in the MediaCentre). |
Nut MR3 included in supply |
Material |
---|
Cylinder tube | Stainless steel |
Piston rod | Stainless steel |
Front cover | Polyoxymethylene |
End cover | Polyoxymethylene |
Connection thread | Stainless steel |
Seal | Acrylonitrile butadiene rubber |
Nut for cylinder mounting | Polyamide |
Nut for piston rod | Stainless steel |
Scraper | Polyurethane |