We are not the manufacturer, authorised distributor or authorised representative of the Aventics (brand of Emerson) brand Worldwide. The private labels and part numbers shown on this website are the property of their respective owners.
Manufacturer
Aventics (brand of Emerson)
Country
Germany
Part number
1670510000
Description
Functional principle | double-acting |
Cushioning | pneumatically |
adjustable | |
Magnetic piston | with magnetic piston |
Piston diameter | 50 mm |
Piston rod thread | M16x1,5 |
Standardization | ISO 6431 |
Stroke | 100 mm |
Sealing material | Acrylonitrile butadiene rubber |
Compressed air connection | G 1/4 |
Compressed air connection type | Internal thread |
Stock availability:
On request
If you are inspecting Aventics (brand of Emerson) 1670510000, catch up with FAMAGA, the world's principle provider of industrial equipment. Our company has lasted for more than ten years - these are ages of experience, which are symbolized in the quality of outputs and individual attention to each consumer. We esteem everyone, who engaged with us - hence, our regular clients obtain the most beneficial purchase forms and discounts on the manufacturing equipment market. At this moment, there are more than 4 thousand such clients, and we constantly arrange new agreements. More than 750 transactions are made per day, because FAMAGA works all over the planet Germany, United Kingdom, South Sudan, Haiti, United States, Colombia, Slovenia, Montenegro, Togo, Qatar, Malaysia, Brazil, Cyprus, Russia, Paraguay, Syria, Georgia, Vietnam, Monaco, Iceland, Estonia, Grenada, The Gambia, Costa Rica, Malta, Comoros, Kazakhstan, Switzerland, Serbia, Nicaragua, North Korea, Morocco, Sierra Leone, Burkina Faso, Mexico, United Arab Emirates, Eswatini, Mozambique, Nigeria, Luxembourg, Latvia, Samoa, Kuwait, Namibia, Albania, Belarus. A well-shaped logistics chains and a partnership network allow us to conduct our products anywhere in the planet with no delay without undermining product quality.
A specific source of good name for FAMAGA is its personnel, each of whom contributes to common cause. We propose into our team only specialists, who already have experience in the sphere of manufacturing equipment.
All items from FAMAGA are ensured - we are responsible for the result of our work. Now, more than 10 million units of products have been delivered, and this quantity is increasing every day. We are happy that buyers choose FAMAGA again and again, and we are glad to make more progressive and technologically modern industrial equipment so as to stay on the top.
To inquire or order, get in touch with us or write to the online chat on our site. You can also direct a list of the necessary equipment to the email of organization - we will contact you ourselves with a prepared commercial proposal from FAMAGA.
Standards | ISO 6431 |
Compressed air connection | Internal thread |
Working pressure min./max. | 2 ... 10 bar |
Ambient temperature min./max. | -20 ... 75 °C |
Medium temperature min./max. | -20 ... 75 °C |
Medium | Compressed air |
Max. particle size | 50 µm |
Oil content of compressed air | 0 ... 5 mg/m³ |
Pressure for determining piston forces | 6 bar |
The pressure dew point must be at least 15 °C under ambient and medium temperature and may not exceed 3 °C . The oil content of compressed air must remain constant during the life cycle. Use only the approved oils from AVENTICS. Further information can be found in the “Technical information” document (available in the MediaCentre). |
Ø25 mm is not according to ISO 6431 |
Material |
---|
Cylinder tube | Aluminum, anodized |
Piston rod | Stainless steel, chrome-plated |
Front cover | Aluminum |
End cover | Aluminum |
Seal | Acrylonitrile butadiene rubber |