We are not the manufacturer, authorised distributor or authorised representative of the Aventics (brand of Emerson) brand Worldwide. The private labels and part numbers shown on this website are the property of their respective owners.
Manufacturer
Aventics (brand of Emerson)
Country
Germany
Part number
7472D02825
Description
Standardization | ISO 15407-1 |
Frame size | 18 mm |
Switching principle | 2x3/2 |
Version | Spool valve, positive overlapping |
Housing | Aluminum |
Sealing material | Acrylonitrile butadiene rubber,Hydrogenated acrylonitrile butadiene rubber |
Connector standard | EN 61076-2-101 |
Protection class | IP65 |
Number of wires | 3-pin |
Port size | M12 |
Type | Plug |
Nominal flow Qn | 450 l/min |
Compressed air connection input | VDMA 02 base plate |
Compressed air connection output | VDMA 02 base plate |
DC operating voltage | 24 V |
Stock availability:
On request
If you are seeking Aventics (brand of Emerson) 7472D02825, communicate with FAMAGA, the world's key provider of factory-made equipment. Our company has worked for more than ten years - these are cycles of experience, which are depicted in the quality of items and special attention to each client. We cherish everyone, who worked with us - thus, our regular clients get the most favorable purchase terms and discounts on the factory-made equipment market. At this moment, there are more than 4 thousand such consumers, and we constantly compose new agreements. More than 700 affairs are settled per day, because FAMAGA delivers all over the world Germany, United Kingdom, Lithuania, Fiji, Bangladesh, Eswatini, Guinea, Austria, Hungary, Chile, Mauritius, Israel, Greece, Malawi, Cameroon, Liberia, Moldova, Czech Republic, Yemen, Bulgaria, Togo, Argentina, Vietnam, Egypt, Turkmenistan, Ecuador, Libya, Turkey, Laos, Mauritania, Denmark, Nigeria, Bosnia and Herzegovina, Angola, Kyrgyzstan, Poland, Belize, Malta, Brunei, Senegal, Malaysia, New Zealand, Ukraine, Dominica, Iran, Sierra Leone. A advanced logistics system and a partnership network allow us to conduct our products anywhere in the world on-time without undermining product quality.
A specific source of repute for FAMAGA is its workers, each of whom contributes to common cause. We invite into our team only professionals, who already have experience in the direction of industrial equipment.
All items from FAMAGA are ensured - we are responsible for the cause of our work. At the moment, more than 10 million units of products have been shipped, and this amount is rising every day. We are happy that buyers choose FAMAGA again and again, and we are pleased to make more exceptional and technologically developed industrial equipment so as stay in control.
To request or place an order, phone us or write to the online chat on our site. You can also forward a list of the required equipment to the email of corporation - we will contact you ourselves with a ready-made commercial proposal from FAMAGA.
Version | Spool valve, positive overlapping |
Sealing principle | Soft sealing |
Blocking principle | Base plate principle, multiple |
Connection type | Plate connection |
Standards | ISO 15407-1, 18 mm |
Connector standard | EN 61076-2-101 |
Working pressure min./max. | See table |
Control pressure min./max. | 2,5 ... 10 bar |
Ambient temperature min./max. | 0 ... 50 °C |
Medium temperature min./max. | 0 ... 50 °C |
Medium | Compressed air |
Max. particle size | 5 µm |
Oil content of compressed air | 0 ... 5 mg/m³ |
Nominal flow Qn | 450 l/min |
Protection class with connection | IP65 |
Protective circuit | TVS diode |
LED status display | Yellow |
Duty cycle | 100 % |
Typ. switch-on time | See table |
Typ. switch-off time | See table |
Mounting screw | M3 |
Weight | 0,12 kg |
The min. control pressure must be adhered to, since otherwise faulty switching and valve failure may result! The pressure dew point must be at least 15 °C under ambient and medium temperature and may not exceed 3 °C . The oil content of compressed air must remain constant during the life cycle. Use only the approved oils from AVENTICS. Further information can be found in the “Technical information” document (available in the MediaCentre). |
Housing | Aluminum, anodized |
Seals | Acrylonitrile butadiene rubber Hydrogenated acrylonitrile butadiene rubber |
Front plate | Polyamide |