We are not the manufacturer, authorised distributor or authorised representative of the Aventics (brand of Emerson) brand Worldwide. The private labels and part numbers shown on this website are the property of their respective owners.
Manufacturer
Aventics (brand of Emerson)
Country
Germany
Part number
7472D02823
Description
Standardization | ISO 15407-1 |
Frame size | 18 mm |
Switching principle | 2x3/2 |
Version | Spool valve, positive overlapping |
Housing | Aluminum |
Sealing material | Acrylonitrile butadiene rubber,Hydrogenated acrylonitrile butadiene rubber |
Connector standard | EN 61076-2-101 |
Protection class | IP65 |
Number of wires | 3-pin |
Port size | M12 |
Type | Plug |
Nominal flow Qn | 450 l/min |
Compressed air connection input | VDMA 02 base plate |
Compressed air connection output | VDMA 02 base plate |
DC operating voltage | 24 V |
Stock availability:
On request
If you are inspecting Aventics (brand of Emerson) 7472D02823, call FAMAGA, the world's major distributor of industrialized equipment. Our company has progressed for more than ten years - these are ages of experience, which are expressed in the quality of outcomes and private attention to each purchaser. We value everyone, who liased with us - thus, our regular customers accept the most convenient purchase conditions and discounts on the factory-made equipment market. At this time, there are more than 4 thousand such buyers, and we constantly form new agreements. More than 700 transactions are made per day, because FAMAGA delivers all over the world Germany, United Kingdom, Greece, South Sudan, Sudan, Tanzania, Bhutan, Kazakhstan, Israel, Hungary, Costa Rica, Rwanda, Mali, Saudi Arabia, Malta, Gambia, Brazil, Libya, Swaziland, Senegal, Djibouti, Moldova, Switzerland, Mauritania, Liechtenstein, Belize, Paraguay, Thailand, Zambia, Belarus, Eswatini, Iceland, Turkmenistan, The Gambia, Czech Republic, Mozambique, Burundi, North Korea, Yemen, Turkey, Qatar, Uruguay, Macedonia, Syria, Australia, Bosnia and Herzegovina. A well-developed logistics connection and a partnership network let us to deliver our products anywhere in the world as soon as possible without compromising product quality.
A special source of good name for FAMAGA is its employees, each of whom contributes to common cause. We request into our team only experts, who already have experience in the sphere of industrial equipment.
All outputs from FAMAGA are guaranteed - we are responsible for the cause of our work. At the moment, more than 10 million units of products have been shipped, and this amount is ascending every day. We are happy that buyers choose FAMAGA again and again, and we strive to make more exceptional and technologically developed industrial equipment so as stay in control.
To inquire or place an order, phone us or write a message to the online chat on our site. You can also direct a list of the required equipment to the email of corporation - we will contact you ourselves with a ready-made commercial proposal from FAMAGA.
Version | Spool valve, positive overlapping |
Sealing principle | Soft sealing |
Blocking principle | Base plate principle, multiple |
Connection type | Plate connection |
Standards | ISO 15407-1, 18 mm |
Connector standard | EN 61076-2-101 |
Working pressure min./max. | See table |
Control pressure min./max. | 2,5 ... 10 bar |
Ambient temperature min./max. | 0 ... 50 °C |
Medium temperature min./max. | 0 ... 50 °C |
Medium | Compressed air |
Max. particle size | 5 µm |
Oil content of compressed air | 0 ... 5 mg/m³ |
Nominal flow Qn | 450 l/min |
Protection class with connection | IP65 |
Protective circuit | TVS diode |
LED status display | Yellow |
Duty cycle | 100 % |
Typ. switch-on time | See table |
Typ. switch-off time | See table |
Mounting screw | M3 |
Weight | 0,12 kg |
The min. control pressure must be adhered to, since otherwise faulty switching and valve failure may result! The pressure dew point must be at least 15 °C under ambient and medium temperature and may not exceed 3 °C . The oil content of compressed air must remain constant during the life cycle. Use only the approved oils from AVENTICS. Further information can be found in the “Technical information” document (available in the MediaCentre). |
Housing | Aluminum, anodized |
Seals | Acrylonitrile butadiene rubber Hydrogenated acrylonitrile butadiene rubber |
Front plate | Polyamide |