We are not the manufacturer, authorised distributor or authorised representative of the Aventics (brand of Emerson) brand Worldwide. The private labels and part numbers shown on this website are the property of their respective owners.
Manufacturer
Aventics (brand of Emerson)
Country
Germany
Part number
0822395908
Description
Piston rod modification | non-rotating,Optionally through (hollow) |
Functional principle | double-acting |
Cushioning | elastic |
Magnetic piston | with magnetic piston |
Piston diameter | 50 mm |
Piston rod thread | M10 |
Standardization | NFE 49004 |
Stroke | 60 mm |
Sealing material | Polyurethane |
Scraper | Polyurethane |
Compressed air connection | G 1/8 |
Compressed air connection type | Internal thread |
Stock availability:
On request
If you are pursuing Aventics (brand of Emerson) 0822395908, get in touch with FAMAGA, the world's dominant retailer of factory-made equipment. Our company has functioned for more than ten years - these are cycles of experience, which are depicted in the quality of spare parts and individual attention to each consumer. We cherish everyone, who worked with us - so, our regular purchasers obtain the most flexible purchase forms and discounts on the manufacturing equipment market. Nowadays, there are more than 4500 such clients, and we constantly arrange new agreements. More than 650 proceedings are resolved per day, because FAMAGA delivers all over the earth Germany, United Kingdom, Czech Republic, United Arab Emirates, Belgium, Palestine, Lithuania, Burundi, Bangladesh, Thailand, Turkey, Saudi Arabia, Chad, Iran, Libya, Armenia, Ghana, Uruguay, Tajikistan, Iraq, United States, Kazakhstan, Pakistan, Brunei, Denmark, Norway, Central African Republic, Bosnia and Herzegovina, Rwanda, Yemen, Zambia, Chile, Andorra, New Zealand, Morocco, Kenya, Nigeria, Zimbabwe, Sierra Leone, Serbia, North Korea, Argentina, Tonga, Tunisia, Togo. A well-elaborated logistics bond and a partnership network assist us to ship our units anywhere in the globe promptly without compromising product quality.
A particular source of pride for FAMAGA is its workers, each of whom contributes to our work. We call into our team only experts, who already have experience in the range of machine made streamlined equipment.
All merchandises from FAMAGA are guaranteed - we are responsible for the result of our work. At the moment, more than 10 million units of products have been shipped, and this bulk is increasing every day. We are glad that clients choose FAMAGA again and again, and we strive to make more developed and technologically developed industrial equipment so as not to lower the bar.
To inquire or book, get in touch with us or write a message to the online chat on our site. You can also direct a list of the required equipment to the email of our company - we will contact you ourselves with a prepared commercial proposal from FAMAGA.
Standards | NFE 49004 |
Compressed air connection | Internal thread |
Ambient temperature min./max. | -20 ... 80 °C |
Medium temperature min./max. | -20 ... 80 °C |
Medium | Compressed air |
Max. particle size | 50 µm |
Oil content of compressed air | 0 ... 5 mg/m³ |
Pressure for determining piston forces | 6.3 bar |
The pressure dew point must be at least 15 °C under ambient and medium temperature and may not exceed 3 °C . The oil content of compressed air must remain constant during the life cycle. Use only the approved oils from AVENTICS. Further information can be found in the “Technical information” document (available in the MediaCentre). |
Use our Internet configurator to order variants with an external thread. |
Material |
---|
Cylinder tube | Aluminum, anodized |
Piston rod | Stainless steel |
Front cover | Aluminum |
End cover | Aluminum |
Seal | Nitrile butadiene rubber Polyurethane |
Scraper | Polyurethane |