We are not the manufacturer, authorised distributor or authorised representative of the Aventics (brand of Emerson) brand Worldwide. The private labels and part numbers shown on this website are the property of their respective owners.
Manufacturer
Aventics (brand of Emerson)
Country
Germany
Part number
R480646385
Description
Functional principle | double-acting |
Cushioning | elastic |
non-adjustable | |
Magnetic piston | with magnetic piston |
Piston diameter | 25 mm |
Piston rod thread | M10x1,25 |
Standardization | ISO 6432 |
Stroke | 125 mm |
Sealing material | Fluorocaoutchouc |
Scraper | Fluorocaoutchouc |
Compressed air connection | G 1/8 |
Compressed air connection type | Internal thread |
Stock availability:
On request
If you are seeking Aventics (brand of Emerson) R480646385, call FAMAGA, the world's major supplier of machine made equipment. Our company has worked for more than ten years - these are cycles of experience, which are depicted in the quality of products and individual attention to each customer. We value everyone, who liased with us - hence, our regular purchasers get the most flexible purchase terms and discounts on the industrial equipment market. Today, there are more than 4000 such consumers, and we constantly form new agreements. More than 750 proceedings are resolved per day, because FAMAGA operates all over the globe Germany, United Kingdom, Cuba, Venezuela, Hungary, Oman, Croatia, Colombia, Swaziland, Finland, Dominican Republic, Turkmenistan, Romania, Bolivia, Togo, Uzbekistan, Honduras, Afghanistan, Netherlands, Burundi, Panama, Uruguay, Monaco, Iran, Georgia, South Sudan, Mauritania, South Korea, Malaysia, Macedonia, Zimbabwe, The Gambia, Yemen, Mauritius, Egypt, Cyprus, Poland, Latvia, Luxembourg, Serbia, Montenegro, Ireland, Suriname, Guatemala, Botswana, Czech Republic. A well-developed logistics chains and a partnership network guide us to deliver our products anywhere in the world immediately without damaging product quality.
A special source of repute for FAMAGA is its employees, each of whom contributes to our work. We propose into our team only specialists, who already have experience in the sphere of industrial equipment.
All products from FAMAGA are affirmed - we are responsible for the outcome of our work. Nowadays, more than 10 million units of products have been shipped, and this number is increasing every day. We are proud that buyers choose FAMAGA again and again, and we strive to make more progressive and technologically modern industrial equipment so as not to lower the bar.
To request or place an order, call us by phone or send a message to the online chat on our official website. You can also direct a list of the required equipment to the email of organization - we will contact you ourselves with a prepared commercial proposal from FAMAGA.
Standards | ISO 6432 |
Compressed air connection | Internal thread |
Working pressure min./max. | 1 ... 10 bar |
Ambient temperature min./max. | -10 ... 120 °C |
Medium temperature min./max. | -10 ... 120 °C |
Medium | Compressed air |
Max. particle size | 50 µm |
Oil content of compressed air | 0 ... 5 mg/m³ |
Pressure for determining piston forces | 6.3 bar |
The pressure dew point must be at least 15 °C under ambient and medium temperature and may not exceed 3 °C . The oil content of compressed air must remain constant during the life cycle. Use only the approved oils from AVENTICS. Further information can be found in the “Technical information” document (available in the MediaCentre). |
Clamping piece for magnetic field sensor necessary |
Ambient temperature with contact query max. 120 °C |
Material |
---|
Cylinder tube | Stainless steel |
Piston rod | Stainless steel |
Piston | Aluminum |
Front cover | Stainless steel, Electropolished |
End cover | Stainless steel, Electropolished |
Seal | Fluorocaoutchouc |
Nut for cylinder mounting | Stainless steel |
Nut for piston rod | Stainless steel |
Scraper | Fluorocaoutchouc |
Guide bushing | Plastic |