We are not the manufacturer, authorised distributor or authorised representative of the Aventics (brand of Emerson) brand Worldwide. The private labels and part numbers shown on this website are the property of their respective owners.
Manufacturer
Aventics (brand of Emerson)
Country
Germany
Part number
R480147984
Description
Functional principle | double-acting |
Cushioning | pneumatically |
adjustable | |
Piston diameter | 50 mm |
Piston rod thread | M16x1,5 |
Standardization | ISO 15552 |
Stroke | 160 mm |
Sealing material | Fluorocaoutchouc |
Scraper | Fluorocaoutchouc |
Compressed air connection | G 1/4 |
Compressed air connection type | Internal thread |
Temperature resistance | Heat resistant |
Stock availability:
On request
If you are seeking Aventics (brand of Emerson) R480147984, make contact with FAMAGA, the world's the best producer of industrial equipment. Our company has progressed for more than ten years - these are cycles of experience, which are illustrated in the quality of goods and individual attention to each buyer. We praise everyone, who collaborated with us - hence, our regular clients accept the most acceptable purchase conditions and discounts on the machine made streamlined equipment market. At this moment, there are more than 3500 such buyers, and we constantly form new agreements. More than 750 agreements are achieved per day, because FAMAGA delivers all over the earth Germany, United Kingdom, Belize, Norway, Malta, Portugal, Nigeria, Czech Republic, Kiribati, Guyana, Sudan, Benin, Japan, Mongolia, Andorra, Senegal, Turkey, Eswatini, Botswana, India, Canada, Mauritania, Kazakhstan, Greece, Denmark, Israel, Brazil, Uzbekistan, South Sudan, Libya, Swaziland, Hungary, Peru, Azerbaijan, Austria, Cameroon, Uruguay, Central African Republic, Ukraine, Angola, Zambia, Georgia, Iraq, Tanzania. A well-developed logistics series and a partnership network allow us to deliver our units anywhere in the globe with no delay without undermining product quality.
A particular source of repute for FAMAGA is its employees, each of whom contributes to our work. We propose into our team only professionals, who already have experience in the range of factory-made equipment.
All goods from FAMAGA are ensured - we are responsible for the cause of our work. At this moment, more than 10 million units of products have been supplied, and this bulk is increasing every day. We are pleased that purchasers choose FAMAGA again and again, and we strive to make more progressive and technologically innovative industrial equipment so as stay in control.
To request or book, contact us or write to the online chat on our official website. You can also dispatch a list of the desirable equipment to the email of organization - we will contact you ourselves with a worked out commercial proposal from FAMAGA.
Standards | ISO 15552 |
Compressed air connection | Internal thread |
Working pressure min./max. | 2 ... 10 bar |
Ambient temperature min./max. | -10 ... 150 °C |
Medium temperature min./max. | -10 ... 150 °C |
Medium | Compressed air |
Max. particle size | 50 µm |
Oil content of compressed air | 0 ... 5 mg/m³ |
Pressure for determining piston forces | 6.3 bar |
The pressure dew point must be at least 15 °C under ambient and medium temperature and may not exceed 3 °C . The oil content of compressed air must remain constant during the life cycle. Use only the approved oils from AVENTICS. Further information can be found in the “Technical information” document (available in the MediaCentre). |
Material |
---|
Cylinder tube | Aluminum, anodized |
Piston rod | Stainless steel |
Front cover | Die-cast aluminum |
End cover | Die-cast aluminum |
Seal | Fluorocaoutchouc |
Nut for piston rod | Steel, galvanized |
Scraper | Fluorocaoutchouc |