We are not the manufacturer, authorised distributor or authorised representative of the Aventics (brand of Emerson) brand Worldwide. The private labels and part numbers shown on this website are the property of their respective owners.
Manufacturer
Aventics (brand of Emerson)
Country
Germany
Part number
0822406482
Description
Functional principle | Single-acting, retracted without pressure |
Cushioning | elastic |
Magnetic piston | with magnetic piston |
Piston diameter | 80 mm |
Piston rod thread | M10 |
Stroke | 25 mm |
Compressed air connection | G 1/4 |
Compressed air connection type | Internal thread |
Stock availability:
On request
If you are looking for Aventics (brand of Emerson) 0822406482, get in touch with FAMAGA, the world's foremost producer of streamlined equipment. Our company has lasted for more than ten years - these are ages of experience, which are illustrated in the quality of products and private attention to each orderer. We understand everyone, who conspired with us - therefore, our regular consumers receive the most favorable purchase terms and discounts on the industrial equipment market. At this moment, there are more than 3500 such clients, and we constantly make new agreements. More than 700 affairs are settled per day, because FAMAGA delivers all over the world Germany, United Kingdom, El Salvador, Switzerland, Croatia, Dominican Republic, Luxembourg, Seychelles, China, Turkmenistan, Mauritius, Argentina, Liberia, Peru, Cyprus, Yemen, Swaziland, United Arab Emirates, Namibia, Cape Verde, Guinea, Chile, Latvia, Pakistan, Panama, South Korea, Guatemala, Guyana, Ecuador, Comoros, Thailand, Burkina Faso, Laos, South Sudan, Afghanistan, Philippines, Sweden, Dominica, Togo, Jordan, Finland, Tunisia, Zimbabwe, Vietnam. A advanced logistics series and a partnership network allow us to dispatch our items anywhere in the world on-time without damaging product quality.
A special source of honor for FAMAGA is its workers, each of whom contributes to our work. We request into our team only specialists, who already have experience in the range of industrial equipment.
All goods from FAMAGA are assured - we are responsible for the outcome of our work. Nowadays, more than 10 million units of products have been supplied, and this number is ascending every day. We are proud that customers choose FAMAGA again and again, and we are eager to make more advanced and technologically modern industrial equipment so as stay in control.
To request or book, call us by phone or write to the online chat on our official website. You can also send a list of the desirable equipment to the email of corporation - we will contact you ourselves with a ready-made commercial proposal from FAMAGA.
Compressed air connection | Internal thread |
Ambient temperature min./max. | -25 ... 80 °C |
Medium temperature min./max. | -25 ... 80 °C |
Medium | Compressed air |
Max. particle size | 50 µm |
Oil content of compressed air | 0 ... 5 mg/m³ |
Pressure for determining piston forces | 6.3 bar |
Weight | See table |
The pressure dew point must be at least 15 °C under ambient and medium temperature and may not exceed 3 °C . The oil content of compressed air must remain constant during the life cycle. Use only the approved oils from AVENTICS. Further information can be found in the “Technical information” document (available in the MediaCentre). |
Material |
---|
Cylinder tube | Aluminum, anodized |
Piston rod | Stainless steel |
Piston | Nitrile rubber |
Front cover | Brass Aluminum |
End cover | Aluminum |