We are not the manufacturer, authorised distributor or authorised representative of the Aventics (brand of Emerson) brand Worldwide. The private labels and part numbers shown on this website are the property of their respective owners.
Manufacturer
Aventics (brand of Emerson)
Country
Germany
Part number
R480070399
Description
Functional principle | double-acting |
Cushioning | elastic |
Magnetic piston | with magnetic piston |
Piston diameter | 50 mm |
Piston rod thread | M16x1,5 |
Standardization | ISO 15552 |
Stroke | 500 mm |
Sealing material | Polyurethane |
Scraper | Polyurethane |
Compressed air connection | G 1/4 |
Compressed air connection type | Internal thread |
Stock availability:
On request
If you are looking for Aventics (brand of Emerson) R480070399, catch up with FAMAGA, the world's main distributor of manufacturing equipment. Our company has lasted for more than ten years - these are years of experience, which are described in the quality of merchandises and individual attention to each purchaser. We cherish everyone, who collaborated with us - therefore, our regular clients procure the most convenient purchase forms and discounts on the factory-made equipment market. Nowadays, there are more than 4500 such purchasers, and we constantly compose new agreements. More than 700 affairs are settled per day, because FAMAGA works all over the planet Germany, United Kingdom, Benin, Serbia, Burkina Faso, Dominica, Egypt, Romania, Bhutan, Ghana, Tonga, Poland, Finland, Myanmar, Guyana, Belgium, Pakistan, Kazakhstan, Mauritania, Azerbaijan, Jordan, Thailand, Costa Rica, Mexico, Samoa, Morocco, Brunei, Panama, Kenya, Syria, The Bahamas, Nepal, Kyrgyzstan, Mauritius, Luxembourg, Eswatini, Cameroon, Croatia, Ireland, Switzerland, Kiribati, Seychelles, Armenia, Togo, Botswana. A well-shaped logistics chains and a partnership network guide us to conduct our items anywhere in the world immediately without undermining product quality.
A particular source of dignity for FAMAGA is its personnel, each of whom contributes to our work. We request into our team only specialists, who already have experience in the sphere of manufacturing equipment.
All outputs from FAMAGA are verified - we are responsible for the outcome of our work. At the moment, more than 10 million units of products have been supplied, and this number is increasing every day. We are happy that clients choose FAMAGA again and again, and we are happy to make more advanced and technologically developed industrial equipment so as stay in control.
To request or order, phone us or write a message to the online chat on our site. You can also send a list of the required equipment to the email of corporation - we will contact you ourselves with a ready-made commercial proposal from FAMAGA.
Standards | ISO 15552 |
Compressed air connection | Internal thread |
Working pressure min./max. | 1,5 ... 10 bar |
Ambient temperature min./max. | -20 ... 80 °C |
Medium temperature min./max. | -20 ... 80 °C |
Medium | Compressed air |
Max. particle size | 50 µm |
Oil content of compressed air | 0 ... 5 mg/m³ |
Pressure for determining piston forces | 6.3 bar |
The pressure dew point must be at least 15 °C under ambient and medium temperature and may not exceed 3 °C . The oil content of compressed air must remain constant during the life cycle. Use only the approved oils from AVENTICS. Further information can be found in the “Technical information” document (available in the MediaCentre). |
Material |
---|
Cylinder tube | Aluminum, anodized |
Piston rod | Stainless steel |
Front cover | Die-cast aluminum |
End cover | Die-cast aluminum |
Seal | Polyurethane |
Nut for piston rod | Steel, galvanized |
Scraper | Polyurethane |