We are not the manufacturer, authorised distributor or authorised representative of the Aventics (brand of Emerson) brand Worldwide. The private labels and part numbers shown on this website are the property of their respective owners.
Manufacturer
Aventics (brand of Emerson)
Country
Germany
Part number
R480646383
Description
Functional principle | double-acting |
Cushioning | elastic |
non-adjustable | |
Magnetic piston | with magnetic piston |
Piston diameter | 25 mm |
Piston rod thread | M10x1,25 |
Standardization | ISO 6432 |
Stroke | 80 mm |
Sealing material | Fluorocaoutchouc |
Scraper | Fluorocaoutchouc |
Compressed air connection | G 1/8 |
Compressed air connection type | Internal thread |
Stock availability:
On request
If you are inspecting Aventics (brand of Emerson) R480646383, reach FAMAGA, the world's foremost provider of streamlined equipment. Our company has lasted for more than ten years - these are ages of experience, which are expressed in the quality of merchandises and personalseparate attention to each orderer. We admire everyone, who engaged with us - hence, our regular clients obtain the most desirable purchase conditions and discounts on the industrial equipment market. At this moment, there are more than 4000 such buyers, and we constantly sign new agreements. More than 750 affairs are settled per day, because FAMAGA operates all over the globe Germany, United Kingdom, Mexico, Belarus, Swaziland, France, Cuba, Indonesia, The Gambia, Burundi, Sudan, Iceland, Nepal, Poland, Qatar, Seychelles, Bangladesh, Brunei, Eswatini, Ukraine, Bosnia and Herzegovina, Liechtenstein, Nicaragua, Dominica, Mozambique, Japan, Haiti, Albania, Mali, South Sudan, Malaysia, Uzbekistan, Australia, Jamaica, Cameroon, Mauritania, Zambia, India, Estonia, Latvia, Pakistan, Moldova, Suriname, Niger, Benin, Comoros. A well-elaborated logistics bond and a partnership network allow us to send our products anywhere in the world with no delay without undermining product quality.
A particular source of good name for FAMAGA is its staff members, each of whom contributes to our work. We accept into our team only professionals, who already have experience in the direction of industrial equipment.
All items from FAMAGA are ensured - we are responsible for the outcome of our work. Nowadays, more than 10 million units of products have been shipped, and this number is growing every day. We are proud that buyers choose FAMAGA again and again, and we are eager to make more progressive and technologically modern industrial equipment so as not to lower the bar.
To inquire or place an order, call us by phone or write to the online chat on our official website. You can also forward a list of the required equipment to the email of organization - we will contact you ourselves with a prepared commercial proposal from FAMAGA.
Standards | ISO 6432 |
Compressed air connection | Internal thread |
Working pressure min./max. | 1 ... 10 bar |
Ambient temperature min./max. | -10 ... 120 °C |
Medium temperature min./max. | -10 ... 120 °C |
Medium | Compressed air |
Max. particle size | 50 µm |
Oil content of compressed air | 0 ... 5 mg/m³ |
Pressure for determining piston forces | 6.3 bar |
The pressure dew point must be at least 15 °C under ambient and medium temperature and may not exceed 3 °C . The oil content of compressed air must remain constant during the life cycle. Use only the approved oils from AVENTICS. Further information can be found in the “Technical information” document (available in the MediaCentre). |
Clamping piece for magnetic field sensor necessary |
Ambient temperature with contact query max. 120 °C |
Material |
---|
Cylinder tube | Stainless steel |
Piston rod | Stainless steel |
Piston | Aluminum |
Front cover | Stainless steel, Electropolished |
End cover | Stainless steel, Electropolished |
Seal | Fluorocaoutchouc |
Nut for cylinder mounting | Stainless steel |
Nut for piston rod | Stainless steel |
Scraper | Fluorocaoutchouc |
Guide bushing | Plastic |