We are not the manufacturer, authorised distributor or authorised representative of the Aventics (brand of Emerson) brand Worldwide. The private labels and part numbers shown on this website are the property of their respective owners.
Manufacturer
Aventics (brand of Emerson)
Country
Germany
Part number
R480646379
Description
Functional principle | double-acting |
Cushioning | elastic |
non-adjustable | |
Magnetic piston | with magnetic piston |
Piston diameter | 20 mm |
Piston rod thread | M8 |
Standardization | ISO 6432 |
Stroke | 400 mm |
Sealing material | Fluorocaoutchouc |
Scraper | Fluorocaoutchouc |
Compressed air connection | G 1/8 |
Compressed air connection type | Internal thread |
Stock availability:
On request
If you are looking for Aventics (brand of Emerson) R480646379, call FAMAGA, the world's main company of factory-made equipment. Our company has existed for more than ten years - these are ages of experience, which are expressed in the quality of merchandises and private attention to each user. We value everyone, who joined with us - hence, our regular buyers receive the most desirable purchase conditions and discounts on the industrial equipment market. At this moment, there are more than 4000 such clients, and we constantly make new agreements. More than 750 affairs are settled per day, because FAMAGA operates all over the globe Germany, United Kingdom, Jamaica, South Sudan, Sierra Leone, Uzbekistan, Guyana, Niger, Pakistan, Benin, Hungary, China, Haiti, Paraguay, Egypt, Azerbaijan, Malawi, Eritrea, Costa Rica, Albania, Namibia, El Salvador, Panama, East Timor, Belize, Brunei, Equatorial Guinea, Belarus, Afghanistan, Bolivia, Macedonia, Indonesia, Rwanda, Dominica, Slovakia, Burkina Faso, Zimbabwe, Madagascar, Thailand, United Arab Emirates, Uruguay, Nepal, Tunisia. A well-shaped logistics system and a partnership network allow us to ship our products anywhere in the earth with no delay without discrediting product quality.
A particular source of honor for FAMAGA is its personnel, each of whom contributes to our work. We request into our team only professionals, who already have experience in the sphere of machine made streamlined equipment.
All outcomes from FAMAGA are assured - we are responsible for the outcome of our work. Nowadays, more than 10 million units of products have been shipped, and this number is ascending every day. We are proud that buyers choose FAMAGA again and again, and we are happy to make more progressive and technologically modern industrial equipment so as not to lower the bar.
To ask a question or place an order, call us by phone or write to the online chat on our official website. You can also direct a list of the needful equipment to the email of organization - we will contact you ourselves with a prepared commercial proposal from FAMAGA.
Standards | ISO 6432 |
Compressed air connection | Internal thread |
Working pressure min./max. | 1 ... 10 bar |
Ambient temperature min./max. | -10 ... 120 °C |
Medium temperature min./max. | -10 ... 120 °C |
Medium | Compressed air |
Max. particle size | 50 µm |
Oil content of compressed air | 0 ... 5 mg/m³ |
Pressure for determining piston forces | 6.3 bar |
The pressure dew point must be at least 15 °C under ambient and medium temperature and may not exceed 3 °C . The oil content of compressed air must remain constant during the life cycle. Use only the approved oils from AVENTICS. Further information can be found in the “Technical information” document (available in the MediaCentre). |
Clamping piece for magnetic field sensor necessary |
Ambient temperature with contact query max. 120 °C |
Material |
---|
Cylinder tube | Stainless steel |
Piston rod | Stainless steel |
Piston | Aluminum |
Front cover | Stainless steel, Electropolished |
End cover | Stainless steel, Electropolished |
Seal | Fluorocaoutchouc |
Nut for cylinder mounting | Stainless steel |
Nut for piston rod | Stainless steel |
Scraper | Fluorocaoutchouc |
Guide bushing | Plastic |