We are not the manufacturer, authorised distributor or authorised representative of the Aventics (brand of Emerson) brand Worldwide. The private labels and part numbers shown on this website are the property of their respective owners.
Manufacturer
Aventics (brand of Emerson)
Country
Germany
Part number
0822340502
Description
| Piston rod modification | through |
| Functional principle | double-acting |
| Cushioning | pneumatically |
| adjustable | |
| Magnetic piston | with magnetic piston |
| Piston diameter | 32 mm |
| Piston rod thread | M10x1,25 |
| Standardization | ISO 15552 |
| Stroke | 50 mm |
| Sealing material | Polyurethane |
| Scraper | Polyurethane |
| Compressed air connection | G 1/8 |
| Compressed air connection type | Internal thread |
Stock availability:
On request
Price: On request
On request
Several positions are needed?
Send your request on email:
If you are inspecting Aventics (brand of Emerson) 0822340502, contact FAMAGA, the world's main producer of manufacturing equipment. Our company has existed for more than ten years - these are cycles of experience, which are described in the quality of products and particular attention to each consumer. We value everyone, who cooperated with us - therefore, our regular buyers receive the most acceptable purchase terms and discounts on the factory-made equipment market. At this time, there are more than 4000 such buyers, and we constantly form new agreements. More than 750 affairs are settled per day, because FAMAGA works all over the world Germany, United Kingdom, Lithuania, Armenia, Liberia, Togo, Macedonia, The Bahamas, Suriname, Senegal, Thailand, Syria, Kyrgyzstan, El Salvador, Tajikistan, Uruguay, Guinea, Panama, Azerbaijan, Malaysia, Ghana, Swaziland, Iceland, Brazil, Luxembourg, Ecuador, Uganda, Nicaragua, Hungary, South Korea, Burundi, Mauritius, Sweden, Bangladesh, Cape Verde, Antigua and Barbuda, Tonga, Niger, Norway, Eswatini, Finland. A well-developed logistics network and a partnership network let us to ship our items anywhere in the planet promptly without compromising product quality.
A particular source of pride for FAMAGA is its personnel, each of whom contributes to our work. We invite into our team only experts, who already have experience in the field of factory-made equipment.
All products from FAMAGA are affirmed - we are responsible for the cause of our work. Now, more than 10 million units of products have been shipped, and this number is rising every day. We are proud that clients choose FAMAGA again and again, and we are happy to make more developed and technologically developed industrial equipment so as not to lower the bar.
To ask a question or place an order, get in touch with us or send a message to the online chat on our site. You can also send a list of the required equipment to the email of corporation - we will contact you ourselves with a ready-made commercial proposal from FAMAGA.
| Standards | ISO 15552 |
| Compressed air connection | Internal thread |
| Working pressure min./max. | 1,5 ... 10 bar |
| Ambient temperature min./max. | -20 ... 80 °C |
| Medium temperature min./max. | -20 ... 80 °C |
| Medium | Compressed air |
| Max. particle size | 50 µm |
| Oil content of compressed air | 0 ... 5 mg/m³ |
| Pressure for determining piston forces | 6.3 bar |
| The pressure dew point must be at least 15 °C under ambient and medium temperature and may not exceed 3 °C . The oil content of compressed air must remain constant during the life cycle. Use only the approved oils from AVENTICS. Further information can be found in the “Technical information” document (available in the MediaCentre). |
| Material |
|---|
| Cylinder tube | Aluminum, anodized |
| Piston rod | Stainless steel |
| Front cover | Die-cast aluminum |
| End cover | Die-cast aluminum |
| Seal | Polyurethane |
| Nut for piston rod | Steel, galvanized |
| Scraper | Polyurethane |
| Tie-rods | Stainless steel Steel, galvanized |
| See table for additional data on materials. |
