We are not the manufacturer, authorised distributor or authorised representative of the Aventics (brand of Emerson) brand Worldwide. The private labels and part numbers shown on this website are the property of their respective owners.
Manufacturer
Aventics (brand of Emerson)
Country
Germany
Part number
0822010764
Description
Piston rod modification | non-rotating |
Functional principle | double-acting |
Cushioning | elastic |
Piston diameter | 50 mm |
Stroke | 25 mm |
Scraper | Polyurethane |
Compressed air connection | G 1/8 |
Compressed air connection type | Internal thread |
Stock availability:
On request
If you are questing Aventics (brand of Emerson) 0822010764, make contact with FAMAGA, the world's major company of industrial equipment. Our company has worked for more than ten years - these are ages of experience, which are illustrated in the quality of goods and personalseparate attention to each orderer. We admire everyone, who collaborated with us - therefore, our regular consumers procure the most favorable purchase conditions and discounts on the manufacturing equipment market. Today, there are more than 4000 such consumers, and we constantly arrange new agreements. More than 650 purchases are terminated per day, because FAMAGA supplies all over the world Germany, United Kingdom, Myanmar, Nicaragua, United States, Cyprus, Saudi Arabia, Syria, Lithuania, Namibia, Hungary, India, Chad, Tajikistan, Ghana, Israel, Armenia, Andorra, Turkey, Austria, Azerbaijan, Latvia, Algeria, Madagascar, Liechtenstein, Chile, Czech Republic, Peru, Belize, Norway, Iraq, Jamaica, Thailand, Mauritius, Moldova, Bosnia and Herzegovina, Tonga, Australia, Central African Republic, Kiribati, Jordan, Malaysia, Niger, Switzerland, Tanzania, Greece. A well-elaborated logistics system and a partnership network allow us to deliver our elements anywhere in the earth on-time without discrediting product quality.
A specific source of repute for FAMAGA is its employees, each of whom contributes to common cause. We accept into our team only specialists, who already have experience in the field of factory-made equipment.
All spare parts from FAMAGA are guaranteed - we are responsible for the result of our work. At this moment, more than 10 million units of products have been shipped, and this number is ascending every day. We are pleased that purchasers choose FAMAGA again and again, and we are eager to make more progressive and technologically developed industrial equipment so as not to lower the bar.
To get some advice or book, call us by phone or write to the online chat on our site. You can also send a list of the required equipment to the email of corporation - we will contact you ourselves with a prepared commercial proposal from FAMAGA.
Compressed air connection | Internal thread |
Ambient temperature min./max. | -25 ... 80 °C |
Medium temperature min./max. | -25 ... 80 °C |
Medium | Compressed air |
Max. particle size | 50 µm |
Oil content of compressed air | 0 ... 5 mg/m³ |
Pressure for determining piston forces | 6.3 bar |
The pressure dew point must be at least 15 °C under ambient and medium temperature and may not exceed 3 °C . The oil content of compressed air must remain constant during the life cycle. Use only the approved oils from AVENTICS. Further information can be found in the “Technical information” document (available in the MediaCentre). |
Other versions can be ordered from AVENTICS sales offices. |
Material |
---|
Cylinder tube | Aluminum, anodized |
Piston rod | Stainless steel |
Piston | Nitrile rubber |
Front cover | Brass Aluminum |
End cover | Aluminum |
Scraper | Polyurethane |