We are not the manufacturer, authorised distributor or authorised representative of the Aventics (brand of Emerson) brand Worldwide. The private labels and part numbers shown on this website are the property of their respective owners.
Manufacturer
Aventics (brand of Emerson)
Country
Germany
Part number
5777775302
Description
Actuating control | double solenoid |
Return type | With spring return |
Switching principle | 5/3 |
Version | Spool valve, positive overlapping |
Housing | Die cast zinc,Polyamide fiber-glass reinforced |
Sealing material | Acrylonitrile butadiene rubber |
Connector standard | EN 175301-803:2006 |
Number of wires | 3-pin |
Port size | EN 175301-803, form A |
Type | Plug |
Qn 1▶2 | 1070 l/min |
Qn 2▶3 | 950 l/min |
Nominal flow Qn | 900 l/min |
Compressed air connection input | G 1/4 |
Compressed air connection output | G 1/4 |
Activation | Electrically |
Temperature resistance | -25 °C cold-resistant |
Stock availability:
On request
If you are seeking Aventics (brand of Emerson) 5777775302, get in touch with FAMAGA, the world's principle provider of machine made equipment. Our company has functioned for more than ten years - these are ages of experience, which are represented in the quality of products and private attention to each customer. We admire everyone, who collaborated with us - hence, our regular clients procure the most helpful purchase terms and discounts on the factory-made equipment market. At this time, there are more than 4500 such consumers, and we constantly compose new agreements. More than 750 contracts are concluded per day, because FAMAGA supplies all over the earth Germany, United Kingdom, Mali, Iraq, Libya, South Sudan, Syria, Costa Rica, Belgium, Swaziland, Malaysia, Turkmenistan, Singapore, Kuwait, Seychelles, Kenya, Fiji, Benin, El Salvador, Djibouti, The Gambia, Monaco, Ecuador, Uruguay, Ireland, Latvia, Peru, Hungary, Vietnam, Zimbabwe, Liechtenstein, Botswana, Nigeria, Mozambique, India, Serbia, Yemen, Egypt, Kyrgyzstan, Angola, Ghana, Afghanistan, East Timor. A well-built logistics link and a partnership network assist us to dispatch our products anywhere in the earth with no delay without undermining product quality.
A specific source of dignity for FAMAGA is its workers, each of whom contributes to common cause. We request into our team only specialists, who already have experience in the direction of machine made streamlined equipment.
All spare parts from FAMAGA are ensured - we are responsible for the result of our work. Nowadays, more than 10 million units of products have been provided, and this amount is increasing every day. We are glad that buyers choose FAMAGA again and again, and we are pleased to make more progressive and technologically innovative industrial equipment so as stay in control.
To consult or order, get in touch with us or send a message to the online chat on our site. You can also forward a list of the needful equipment to the email of firm - we will contact you ourselves with a prepared commercial proposal from FAMAGA.
Version | Spool valve, positive overlapping |
Activation | Electrically |
Pilot | Internal |
Sealing principle | Soft sealing |
Working pressure min./max. | 3 ... 10 bar |
Control pressure min./max. | 3 ... 10 bar |
Ambient temperature min./max. | See table |
Medium temperature min./max. | See table |
Medium | Compressed air |
Max. particle size | 50 µm |
Oil content of compressed air | 0 ... 1 mg/m³ |
Nominal flow Qn | 900 l/min |
Nominal flow 1 ▶ 2 | See table |
Nominal flow 2 ▶ 3 | See table |
Compressed air connection | according to ISO 228-1 |
Pilot control exhaust | with directional pilot air exhaust |
Connector standard | EN 175301-803:2006 |
Reverse polarity protection | Protected against polarity reversal |
Compatibility index | 13 14 |
Duty cycle | 100 % |
Mounting on manifold strip | P-strip PRS strip |
The min. control pressure must be adhered to, since otherwise faulty switching and valve failure may result! The pressure dew point must be at least 15 °C under ambient and medium temperature and may not exceed 3 °C . The oil content of compressed air must remain constant during the life cycle. Use only the approved oils from AVENTICS. Further information can be found in the “Technical information” document (available in the MediaCentre). |
ATEX optional: ATEX version can be produced by combining the basic valve without coil with an ATEX coil. ATEX ID: see ATEX coils catalog page. |
Material |
---|
Housing | Die cast zinc Polyamide fiber-glass reinforced |
Seals | Acrylonitrile butadiene rubber |