We are not the manufacturer, authorised distributor or authorised representative of the Aventics (brand of Emerson) brand Worldwide. The private labels and part numbers shown on this website are the property of their respective owners.
Manufacturer
Aventics (brand of Emerson)
Country
Germany
Part number
0822396009
Description
Piston rod modification | Optionally through |
Functional principle | double-acting |
Cushioning | elastic |
Magnetic piston | with magnetic piston |
Piston diameter | 63 mm |
Piston rod thread | M10 |
Standardization | NFE 49004 |
Stroke | 80 mm |
Sealing material | Polyurethane |
Scraper | Polyurethane |
ATEX optional | |
Compressed air connection | G 1/8 |
Compressed air connection type | Internal thread |
Temperature resistance | Optionally heat-resistant |
Stock availability:
On request
If you are inspecting Aventics (brand of Emerson) 0822396009, call FAMAGA, the world's influential company of industrial equipment. Our company has operated for more than ten years - these are years of experience, which are expressed in the quality of items and individual attention to each orderer. We admire everyone, who engaged with us - thus, our regular buyers pick up the most desirable purchase terms and discounts on the manufacturing equipment market. At this moment, there are more than 3500 such buyers, and we constantly make new agreements. More than 700 contracts are concluded per day, because FAMAGA supplies all over the globe Germany, United Kingdom, South Sudan, Djibouti, Seychelles, Estonia, Italy, Jordan, Palestine, Kazakhstan, Eswatini, Iran, Qatar, Ecuador, Latvia, Bosnia and Herzegovina, Dominica, Argentina, Japan, Jamaica, Singapore, Armenia, Liberia, Cyprus, Turkmenistan, Mongolia, Haiti, The Bahamas, Mozambique, Botswana, Paraguay, Mauritania, United Arab Emirates, Iceland, Zimbabwe, Fiji, Benin, Serbia, Comoros, Luxembourg, Finland, Australia, South Korea, Afghanistan, Croatia, Kuwait, Swaziland, Georgia. A well-developed logistics link and a partnership network help us to conduct our products anywhere in the earth as soon as possible without compromising product quality.
A special source of dignity for FAMAGA is its workers, each of whom contributes to common cause. We invite into our team only professionals, who already have experience in the range of industrial equipment.
All outcomes from FAMAGA are ensured - we are responsible for the result of our work. At this moment, more than 10 million units of products have been supplied, and this bulk is rising every day. We are happy that consumers choose FAMAGA again and again, and we are happy to make more progressive and technologically modern industrial equipment so as stay in control.
To ask a question or order, contact us or send a message to the online chat on our site. You can also dispatch a list of the desirable equipment to the email of our company - we will contact you ourselves with a worked out commercial proposal from FAMAGA.
Standards | NFE 49004 |
Certificates | ATEX optional |
Compressed air connection | Internal thread |
Ambient temperature min./max. | -20 ... 80 °C |
Medium temperature min./max. | -20 ... 80 °C |
Medium | Compressed air |
Max. particle size | 50 µm |
Oil content of compressed air | 0 ... 5 mg/m³ |
Pressure for determining piston forces | 6.3 bar |
The pressure dew point must be at least 15 °C under ambient and medium temperature and may not exceed 3 °C . The oil content of compressed air must remain constant during the life cycle. Use only the approved oils from AVENTICS. Further information can be found in the “Technical information” document (available in the MediaCentre). |
ATEX-certified cylinders with identification II 2G Ex h IIB T4 Gb / II 2D Ex h IIIB T135°C Db_X can be generated in the Internet configurator. The operating temperature range for ATEX-certified cylinders is -20 °C ... 50 °C. The material for heat-resistant scraper and seal variants (ambient temperature: -10 °C ... 120 °C) is fluorocaoutchouc. Further options can be generated in the Internet configurator. |
Material |
---|
Cylinder tube | Aluminum, anodized |
Piston rod | Stainless steel |
Front cover | Aluminum |
End cover | Aluminum |
Seal | Nitrile butadiene rubber Polyurethane |
Scraper | Polyurethane |