We are not the manufacturer, authorised distributor or authorised representative of the Aventics (brand of Emerson) brand Worldwide. The private labels and part numbers shown on this website are the property of their respective owners.
If you are questing Aventics (brand of Emerson) R480176932, connect FAMAGA, the world's central company of machine made equipment. Our company has progressed for more than ten years - these are cycles of experience, which are illustrated in the quality of goods and special attention to each customer. We understand everyone, who cooperated with us - hence, our regular customers accept the most acceptable purchase conditions and discounts on the machine made streamlined equipment market. At this moment, there are more than 3500 such buyers, and we constantly make new agreements. More than 750 affairs are settled per day, because FAMAGA works all over the earth Germany, United Kingdom, Oman, Palestine, Senegal, Finland, Croatia, New Zealand, Chad, East Timor, Kenya, Slovakia, Argentina, Chile, Burma, Kyrgyzstan, Sudan, Kiribati, Malawi, The Gambia, Nigeria, Liberia, Denmark, Liechtenstein, Zambia, Fiji, Austria, Sweden, Niger, Bulgaria, Greece, Seychelles, India, Namibia, Philippines, Rwanda, Iran, Ireland, Hungary, Turkey, Dominica, Armenia, Jordan, Bosnia and Herzegovina, China. A well-built logistics chains and a partnership network allow us to dispatch our goods anywhere in the planet with no delay without compromising product quality.
A particular source of pride for FAMAGA is its team members, each of whom contributes to our work. We invite into our team only professionals, who already have experience in the field of manufacturing equipment.
All outcomes from FAMAGA are guaranteed - we are responsible for the result of our work. At this moment, more than 10 million units of products have been supplied, and this bulk is rising every day. We are pleased that customers choose FAMAGA again and again, and we are happy to make more progressive and technologically developed industrial equipment so as to stay on the top.
To consult or book, contact us or write to the online chat on our official website. You can also send a list of the necessary equipment to the email of organization - we will contact you ourselves with a ready-made commercial proposal from FAMAGA.
Compressed air connection | Internal thread |
Working pressure min./max. | 2 ... 10 bar |
Ambient temperature min./max. | -20 ... 80 °C |
Medium temperature min./max. | -20 ... 80 °C |
Medium | Compressed air |
Max. particle size | 50 µm |
Oil content of compressed air | 0 ... 5 mg/m³ |
Pressure for determining piston forces | 6.3 bar |
The pressure dew point must be at least 15 °C under ambient and medium temperature and may not exceed 3 °C . The oil content of compressed air must remain constant during the life cycle. Use only the approved oils from AVENTICS. Further information can be found in the “Technical information” document (available in the MediaCentre). |
Material |
---|
Cylinder tube | Aluminum, anodized |
Piston rod | Stainless steel |
Front cover | Die-cast aluminum |
End cover | Die-cast aluminum |
Seal | Polyurethane |
Nut for piston rod | Steel, galvanized |
Scraper | Polyurethane |
Tie-rods | Stainless steel Steel, galvanized |
See table for additional data on materials. |