We are not the manufacturer, authorised distributor or authorised representative of the Aventics (brand of Emerson) brand Worldwide. The private labels and part numbers shown on this website are the property of their respective owners.
Manufacturer
Aventics (brand of Emerson)
Country
Germany
Part number
R480651411
Description
Functional principle | double-acting |
Cushioning | pneumatically |
non-adjustable | |
Magnetic piston | with magnetic piston |
Piston diameter | 20 mm |
Piston rod thread | M8 |
Standardization | ISO 6432 |
Stroke | 50 mm |
Sealing material | Nitrile butadiene rubber |
Scraper | Thermoplastic polyurethane (TPU) |
ATEX optional | |
Compressed air connection | G 1/8 |
Compressed air connection type | Internal thread |
Stock availability:
On request
If you are inspecting Aventics (brand of Emerson) R480651411, catch up with FAMAGA, the world's top distributor of manufacturing equipment. Our company has advanced for more than ten years - these are years of experience, which are depicted in the quality of products and personalseparate attention to each buyer. We esteem everyone, who collaborated with us - therefore, our regular clients bring in the most flexible purchase forms and discounts on the industrial equipment market. At this time, there are more than 4000 such clients, and we constantly compose new agreements. More than 650 contracts are concluded per day, because FAMAGA works all over the globe Germany, United Kingdom, Sweden, Cuba, Sri Lanka, Kazakhstan, Pakistan, Uzbekistan, South Sudan, Congo, Ghana, Mexico, Kuwait, Algeria, Malta, Macedonia, Slovenia, Jamaica, Bulgaria, Singapore, Equatorial Guinea, Poland, Bangladesh, Haiti, Suriname, Seychelles, Yemen, Rwanda, China, Mauritania, Togo, Brazil, United Arab Emirates, Russia, Cameroon, Mozambique, Chile, Syria, Kyrgyzstan, Madagascar, Eswatini, Tajikistan, Qatar, South Korea, Serbia, Albania, Paraguay. A well-elaborated logistics series and a partnership network let us to send our products anywhere in the planet on-time without undermining product quality.
A particular source of good name for FAMAGA is its staff members, each of whom contributes to our work. We accept into our team only experts, who already have experience in the sphere of manufacturing equipment.
All outputs from FAMAGA are ensured - we are responsible for the result of our work. Nowadays, more than 10 million units of products have been shipped, and this number is growing every day. We are proud that buyers choose FAMAGA again and again, and we are pleased to make more advanced and technologically innovative industrial equipment so as to stay on the top.
To inquire or place an order, call us by phone or write a message to the online chat on our official website. You can also direct a list of the necessary equipment to the email of our company - we will contact you ourselves with a worked out commercial proposal from FAMAGA.
Standards | ISO 6432 |
Certificates | ATEX optional |
Compressed air connection | Internal thread |
Working pressure min./max. | 1 ... 10 bar |
Ambient temperature min./max. | -20 ... 80 °C |
Medium temperature min./max. | -20 ... 80 °C |
Medium | Compressed air |
Max. particle size | 50 µm |
Oil content of compressed air | 0 ... 5 mg/m³ |
Pressure for determining piston forces | 6.3 bar |
The pressure dew point must be at least 15 °C under ambient and medium temperature and may not exceed 3 °C . The oil content of compressed air must remain constant during the life cycle. Use only the approved oils from AVENTICS. Further information can be found in the “Technical information” document (available in the MediaCentre). |
Clamping piece for magnetic field sensor necessary |
ATEX-certified cylinders with identification II 2G Ex h IIB T4 Gb / II 2D Ex h IIIB T135°C Db_X can be generated in the Internet configurator. The operating temperature range for ATEX-certified cylinders is -20 °C ... 50 °C. |
Material |
---|
Cylinder tube | Stainless steel, ground |
Piston rod | Stainless steel, ground |
Piston | Aluminum |
Front cover | Stainless steel, Electropolished |
End cover | Stainless steel, Electropolished |
Seal | Nitrile butadiene rubber |
Nut for cylinder mounting | Stainless steel, ground |
Nut for piston rod | Stainless steel, ground |
Scraper | Thermoplastic polyurethane (TPU) |
Guide bushing | Steel |