We are not the manufacturer, authorised distributor or authorised representative of the Aventics (brand of Emerson) brand Worldwide. The private labels and part numbers shown on this website are the property of their respective owners.
Manufacturer
Aventics (brand of Emerson)
Country
Germany
Part number
R480651410
Description
Functional principle | double-acting |
Cushioning | pneumatically |
non-adjustable | |
Magnetic piston | with magnetic piston |
Piston diameter | 20 mm |
Piston rod thread | M8 |
Standardization | ISO 6432 |
Stroke | 25 mm |
Sealing material | Nitrile butadiene rubber |
Scraper | Thermoplastic polyurethane (TPU) |
ATEX optional | |
Compressed air connection | G 1/8 |
Compressed air connection type | Internal thread |
Stock availability:
On request
If you are pursuing Aventics (brand of Emerson) R480651410, communicate with FAMAGA, the world's key company of machine made equipment. Our company has progressed for more than ten years - these are ages of experience, which are illustrated in the quality of products and individual attention to each orderer. We respect everyone, who engaged with us - hence, our regular consumers pick up the most flexible purchase terms and discounts on the machine made streamlined equipment market. At present, there are more than 3500 such consumers, and we constantly sign new agreements. More than 650 affairs are settled per day, because FAMAGA delivers all over the world Germany, United Kingdom, Macedonia, Malawi, Bosnia and Herzegovina, Ireland, Chile, Togo, Gambia, Norway, Mexico, Morocco, Armenia, Libya, Zambia, Fiji, Iceland, Turkmenistan, Ukraine, Tunisia, Vietnam, Antigua and Barbuda, Uruguay, El Salvador, Australia, Ecuador, Senegal, Comoros, Andorra, Cameroon, Mali, Denmark, Brunei, Hungary, Ghana, Eswatini, Sudan, Algeria, Kiribati. A advanced logistics network and a partnership network allow us to dispatch our products anywhere in the world on-time without compromising product quality.
A specific source of good name for FAMAGA is its team members, each of whom contributes to our work. We request into our team only specialists, who already have experience in the field of factory-made equipment.
All goods from FAMAGA are affirmed - we are responsible for the cause of our work. At this moment, more than 10 million units of products have been supplied, and this quantity is rising every day. We are proud that consumers choose FAMAGA again and again, and we strive to make more advanced and technologically modern industrial equipment so as keep on top of it.
To consult or make a request, get in touch with us or write a message to the online chat on our official website. You can also dispatch a list of the required equipment to the email of corporation - we will contact you ourselves with a made commercial proposal from FAMAGA.
Standards | ISO 6432 |
Certificates | ATEX optional |
Compressed air connection | Internal thread |
Working pressure min./max. | 1 ... 10 bar |
Ambient temperature min./max. | -20 ... 80 °C |
Medium temperature min./max. | -20 ... 80 °C |
Medium | Compressed air |
Max. particle size | 50 µm |
Oil content of compressed air | 0 ... 5 mg/m³ |
Pressure for determining piston forces | 6.3 bar |
The pressure dew point must be at least 15 °C under ambient and medium temperature and may not exceed 3 °C . The oil content of compressed air must remain constant during the life cycle. Use only the approved oils from AVENTICS. Further information can be found in the “Technical information” document (available in the MediaCentre). |
Clamping piece for magnetic field sensor necessary |
ATEX-certified cylinders with identification II 2G Ex h IIB T4 Gb / II 2D Ex h IIIB T135°C Db_X can be generated in the Internet configurator. The operating temperature range for ATEX-certified cylinders is -20 °C ... 50 °C. |
Material |
---|
Cylinder tube | Stainless steel, ground |
Piston rod | Stainless steel, ground |
Piston | Aluminum |
Front cover | Stainless steel, Electropolished |
End cover | Stainless steel, Electropolished |
Seal | Nitrile butadiene rubber |
Nut for cylinder mounting | Stainless steel, ground |
Nut for piston rod | Stainless steel, ground |
Scraper | Thermoplastic polyurethane (TPU) |
Guide bushing | Steel |