We are not the manufacturer, authorised distributor or authorised representative of the Aventics (brand of Emerson) brand Worldwide. The private labels and part numbers shown on this website are the property of their respective owners.
Manufacturer
Aventics (brand of Emerson)
Country
Germany
Part number
1670405000
Description
Functional principle | double-acting |
Cushioning | pneumatically |
adjustable | |
Magnetic piston | with magnetic piston |
Piston diameter | 40 mm |
Piston rod thread | M12x1,25 |
Standardization | ISO 6431 |
Stroke | 50 mm |
Sealing material | Acrylonitrile butadiene rubber |
Compressed air connection | G 1/4 |
Compressed air connection type | Internal thread |
Stock availability:
On request
If you are looking for Aventics (brand of Emerson) 1670405000, reach FAMAGA, the world's key retailer of streamlined equipment. Our company has operated for more than ten years - these are cycles of experience, which are illustrated in the quality of outcomes and special attention to each orderer. We admire everyone, who worked with us - so, our regular buyers pick up the most acceptable purchase terms and discounts on the factory-made equipment market. At this moment, there are more than 4500 such customers, and we constantly compose new agreements. More than 600 transactions are made per day, because FAMAGA supplies all over the earth Germany, United Kingdom, Moldova, Tunisia, Honduras, Madagascar, Turkey, United States, Grenada, Tonga, Palestine, Mali, Syria, Liberia, Burma, Slovakia, Central African Republic, Kyrgyzstan, United Arab Emirates, Hungary, Denmark, Argentina, India, Pakistan, Antigua and Barbuda, Kiribati, Azerbaijan, Bolivia, Liechtenstein, Sierra Leone, Croatia, Dominica, Laos, Armenia, Paraguay, Zambia, Zimbabwe, Thailand, Equatorial Guinea, Lithuania, Panama, Norway, Brazil. A advanced logistics link and a partnership network allow us to send our goods anywhere in the globe with no delay without discrediting product quality.
A specific source of pride for FAMAGA is its workers, each of whom contributes to common cause. We invite into our team only specialists, who already have experience in the direction of factory-made equipment.
All merchandises from FAMAGA are assured - we are responsible for the aftereffect of our work. At this moment, more than 10 million units of products have been supplied, and this amount is rising every day. We are glad that clients choose FAMAGA again and again, and we are pleased to make more developed and technologically developed industrial equipment so as keep on top of it.
To consult or book, phone us or write to the online chat on our site. You can also forward a list of the desirable equipment to the email of firm - we will contact you ourselves with a ready-made commercial proposal from FAMAGA.
Standards | ISO 6431 |
Compressed air connection | Internal thread |
Working pressure min./max. | 2 ... 10 bar |
Ambient temperature min./max. | -20 ... 75 °C |
Medium temperature min./max. | -20 ... 75 °C |
Medium | Compressed air |
Max. particle size | 50 µm |
Oil content of compressed air | 0 ... 5 mg/m³ |
Pressure for determining piston forces | 6 bar |
The pressure dew point must be at least 15 °C under ambient and medium temperature and may not exceed 3 °C . The oil content of compressed air must remain constant during the life cycle. Use only the approved oils from AVENTICS. Further information can be found in the “Technical information” document (available in the MediaCentre). |
Ø25 mm is not according to ISO 6431 |
Material |
---|
Cylinder tube | Aluminum, anodized |
Piston rod | Stainless steel, chrome-plated |
Front cover | Aluminum |
End cover | Aluminum |
Seal | Acrylonitrile butadiene rubber |