We are not the manufacturer, authorised distributor or authorised representative of the Aventics (brand of Emerson) brand Worldwide. The private labels and part numbers shown on this website are the property of their respective owners.
Manufacturer
Aventics (brand of Emerson)
Country
Germany
Part number
1025100000
Description
Functional principle | Single-acting, retracted without pressure |
Piston diameter | 80 mm |
Piston rod thread | M12 |
Stroke | 40 mm |
Sealing material | Acrylonitrile butadiene rubber |
Compressed air connection | G 1/4 |
Compressed air connection type | Internal thread |
Stock availability:
On request
If you are inspecting Aventics (brand of Emerson) 1025100000, reach FAMAGA, the world's main supplier of mechanized equipment. Our company has operated for more than ten years - these are cycles of experience, which are depicted in the quality of outputs and individual attention to each purchaser. We understand everyone, who engaged with us - hence, our regular purchasers receive the most acceptable purchase terms and discounts on the manufacturing equipment market. At this time, there are more than 4500 such clients, and we constantly arrange new agreements. More than 650 contracts are concluded per day, because FAMAGA supplies all over the earth Germany, United Kingdom, Burma, Burundi, Italy, Swaziland, Mongolia, Greece, Tonga, Romania, Bhutan, Azerbaijan, Uzbekistan, Kyrgyzstan, Bangladesh, Thailand, Kiribati, Mozambique, Chile, Georgia, Ecuador, Estonia, Zambia, Russia, Comoros, Denmark, Armenia, Turkmenistan, Panama, Andorra, Iraq, Qatar, Sudan, Antigua and Barbuda, Bulgaria, New Zealand, Iceland, China, Libya, Albania, Brazil, Sierra Leone, Iran, Haiti, Mali, Norway, Macedonia, Belarus. A well-developed logistics network and a partnership network help us to ship our units anywhere in the earth with no delay without damaging product quality.
A particular source of good name for FAMAGA is its workers, each of whom contributes to common cause. We accept into our team only specialists, who already have experience in the direction of machine made streamlined equipment.
All products from FAMAGA are ensured - we are responsible for the aftereffect of our work. At this moment, more than 10 million units of products have been shipped, and this quantity is increasing every day. We are glad that purchasers choose FAMAGA again and again, and we are pleased to make more progressive and technologically advanced industrial equipment so as not to lower the bar.
To inquire or make a request, get in touch with us or write a message to the online chat on our site. You can also forward a list of the needful equipment to the email of our company - we will contact you ourselves with a made commercial proposal from FAMAGA.
Compressed air connection | Internal thread |
Working pressure min./max. | 2 ... 8 bar |
Ambient temperature min./max. | -20 ... 70 °C |
Medium temperature min./max. | -20 ... 70 °C |
Medium | Compressed air |
Max. particle size | 50 µm |
Oil content of compressed air | 0 ... 5 mg/m³ |
Pressure for determining piston forces | 6 bar |
Weight | See table |
The pressure dew point must be at least 15 °C under ambient and medium temperature and may not exceed 3 °C . The oil content of compressed air must remain constant during the life cycle. Use only the approved oils from AVENTICS. Further information can be found in the “Technical information” document (available in the MediaCentre). |
Diaphragm actuator strokes are tolerance-dependent. Tolerance at 40 mm , 50 mm , 80 mm stroke: ± 3 mm |
Material |
---|
Cylinder tube | Steel |
Piston rod | Steel |
Front cover | Steel |
Seal | Acrylonitrile butadiene rubber |