We are not the manufacturer, authorised distributor or authorised representative of the Aventics (brand of Emerson) brand Worldwide. The private labels and part numbers shown on this website are the property of their respective owners.
Manufacturer
Aventics (brand of Emerson)
Country
Germany
Part number
0822496103
Description
Piston rod modification | Optionally heat-resistant |
Functional principle | Single-acting, extended without pressure |
Cushioning | elastic |
Magnetic piston | with magnetic piston |
Piston diameter | 63 mm |
Piston rod thread | M10 |
Standardization | NFE 49004 |
Stroke | 20 mm |
Sealing material | Polyurethane |
Scraper | Polyurethane |
Compressed air connection | G 1/8 |
Compressed air connection type | Internal thread |
Stock availability:
On request
If you are looking for Aventics (brand of Emerson) 0822496103, reach FAMAGA, the world's top company of factory-made equipment. Our company has progressed for more than ten years - these are cycles of experience, which are illustrated in the quality of products and particular attention to each buyer. We praise everyone, who worked with us - therefore, our regular consumers obtain the most favorable purchase conditions and discounts on the factory-made equipment market. At this moment, there are more than 4 thousand such clients, and we constantly make new agreements. More than 700 proceedings are resolved per day, because FAMAGA supplies all over the planet Germany, United Kingdom, Burkina Faso, Norway, Guyana, Russia, Papua New Guinea, East Timor, Zimbabwe, Afghanistan, Zambia, Azerbaijan, United States, Chad, Tunisia, Morocco, The Bahamas, Eritrea, Kyrgyzstan, Cape Verde, Mauritania, Luxembourg, Central African Republic, Costa Rica, Chile, Georgia, Madagascar, Sweden, Ireland, Montenegro, Latvia, Pakistan, Kazakhstan, Finland, Poland, Bolivia, Iceland, Syria, New Zealand, Panama, Equatorial Guinea, The Gambia, Slovakia, Peru, Egypt, Tajikistan, Yemen, Nepal, Cyprus. A well-elaborated logistics bond and a partnership network guide us to dispatch our units anywhere in the world quickly without discrediting product quality.
A special source of good name for FAMAGA is its workers, each of whom contributes to our work. We request into our team only experts, who already have experience in the direction of manufacturing equipment.
All outcomes from FAMAGA are ensured - we are responsible for the outcome of our work. Nowadays, more than 10 million units of products have been supplied, and this number is amounting every day. We are happy that customers choose FAMAGA again and again, and we are pleased to make more advanced and technologically modern industrial equipment so as stay in control.
To request or make a request, phone us or write to the online chat on our site. You can also send a list of the desirable equipment to the email of corporation - we will contact you ourselves with a ready-made commercial proposal from FAMAGA.
Standards | NFE 49004 |
Compressed air connection | Internal thread |
Ambient temperature min./max. | -20 ... 80 °C |
Medium temperature min./max. | -20 ... 80 °C |
Medium | Compressed air |
Max. particle size | 5 µm |
Oil content of compressed air | 0 ... 5 mg/m³ |
Pressure for determining piston forces | 6.3 bar |
The pressure dew point must be at least 15 °C under ambient and medium temperature and may not exceed 3 °C . The oil content of compressed air must remain constant during the life cycle. Use only the approved oils from AVENTICS. Further information can be found in the “Technical information” document (available in the MediaCentre). |
The material for heat-resistant scraper and seal variants (ambient temperature: -10 °C ... 120 °C) is fluorocaoutchouc. Further options can be generated in the Internet configurator. |
Material |
---|
Cylinder tube | Aluminum, anodized |
Piston rod | Stainless steel |
Front cover | Aluminum |
End cover | Aluminum |
Seal | Nitrile butadiene rubber Polyurethane |
Scraper | Polyurethane |