We are not the manufacturer, authorised distributor or authorised representative of the Aventics (brand of Emerson) brand Worldwide. The private labels and part numbers shown on this website are the property of their respective owners.
Manufacturer
Aventics (brand of Emerson)
Country
Germany
Part number
0822240402
Description
Functional principle | double-acting |
Cushioning | pneumatically |
adjustable | |
Piston diameter | 32 mm |
Piston rod thread | M10x1,25 |
Standardization | ISO 15552 |
Stroke | 80 mm |
Sealing material | Fluorocaoutchouc |
Scraper | Fluorocaoutchouc |
Compressed air connection | G 1/8 |
Compressed air connection type | Internal thread |
Temperature resistance | Heat resistant |
Stock availability:
On request
If you are looking for Aventics (brand of Emerson) 0822240402, contact FAMAGA, the world's key producer of industrial equipment. Our company has existed for more than ten years - these are ages of experience, which are described in the quality of products and individual attention to each consumer. We appreciate everyone, who cooperated with us - therefore, our regular purchasers receive the most flexible purchase conditions and discounts on the industrial equipment market. Today, there are more than 4000 such purchasers, and we constantly make new agreements. More than 700 transactions are made per day, because FAMAGA operates all over the world Germany, United Kingdom, Turkey, Samoa, Palestine, Tonga, Tanzania, Uzbekistan, Slovenia, Uganda, South Korea, Panama, Austria, Jamaica, Djibouti, Lebanon, Nepal, Gambia, Bhutan, Brazil, Bulgaria, Slovakia, Chad, Liechtenstein, Brunei, Liberia, Macedonia, Sudan, Guyana, Kazakhstan, Mauritius, Bangladesh, Czech Republic, Syria, Rwanda, Iran, Mali, Mauritania, Belize, Laos, North Korea, Ukraine, Indonesia, Hungary, Montenegro, Norway, Iraq, Antigua and Barbuda, Mongolia. A well-built logistics network and a partnership network guide us to conduct our goods anywhere in the world on-time without disreputing product quality.
A specific source of dignity for FAMAGA is its workers, each of whom contributes to our work. We request into our team only specialists, who already have experience in the field of factory-made equipment.
All products from FAMAGA are ensured - we are responsible for the cause of our work. At the moment, more than 10 million units of products have been shipped, and this number is amounting every day. We are proud that customers choose FAMAGA again and again, and we are pleased to make more advanced and technologically developed industrial equipment so as not to lower the bar.
To request or place an order, contact us or write to the online chat on our official website. You can also send a list of the required equipment to the email of corporation - we will contact you ourselves with a ready-made commercial proposal from FAMAGA.
Standards | ISO 15552 |
Compressed air connection | Internal thread |
Working pressure min./max. | 1,5 ... 10 bar |
Ambient temperature min./max. | -10 ... 150 °C |
Medium temperature min./max. | -10 ... 150 °C |
Medium | Compressed air |
Max. particle size | 50 µm |
Oil content of compressed air | 0 ... 5 mg/m³ |
Pressure for determining piston forces | 6.3 bar |
The pressure dew point must be at least 15 °C under ambient and medium temperature and may not exceed 3 °C . The oil content of compressed air must remain constant during the life cycle. Use only the approved oils from AVENTICS. Further information can be found in the “Technical information” document (available in the MediaCentre). |
Material |
---|
Cylinder tube | Aluminum, anodized |
Piston rod | Stainless steel |
Front cover | Die-cast aluminum |
End cover | Die-cast aluminum |
Seal | Fluorocaoutchouc |
Nut for piston rod | Steel, galvanized |
Scraper | Fluorocaoutchouc |
Tie-rods | Stainless steel Steel, galvanized |
See table for additional data on materials. |