We are not the manufacturer, authorised distributor or authorised representative of the Aventics (brand of Emerson) brand Worldwide. The private labels and part numbers shown on this website are the property of their respective owners.
Manufacturer
Aventics (brand of Emerson)
Country
Germany
Part number
0821201024
Description
Standardization | ISO 5599-1 |
Frame size | ISO 2 |
Sealing material | Acrylonitrile butadiene rubber |
Subbase | Aluminum |
Stock availability:
On request
If you are questing Aventics (brand of Emerson) 0821201024, make contact with FAMAGA, the world's foremost retailer of mechanized equipment. Our company has advanced for more than ten years - these are ages of experience, which are illustrated in the quality of goods and special attention to each customer. We understand everyone, who liased with us - therefore, our regular consumers get the most convenient purchase conditions and discounts on the industrial equipment market. At present, there are more than 4000 such consumers, and we constantly arrange new agreements. More than 650 purchases are terminated per day, because FAMAGA operates all over the earth Germany, United Kingdom, Sudan, Belarus, Kiribati, Iceland, Tunisia, Japan, Dominican Republic, Indonesia, Estonia, Palestine, Australia, Switzerland, Samoa, Gambia, Haiti, Antigua and Barbuda, Libya, Uganda, Austria, Burundi, Malta, Syria, Jordan, Chad, Lithuania, Uzbekistan, Jamaica, New Zealand, Nicaragua, Turkey, Liechtenstein, Bulgaria, Algeria, Israel, Afghanistan, Andorra, Niger, Macedonia, Zambia, Dominica, Ghana, Central African Republic, Mongolia, Qatar, Tanzania, Brazil. A well-elaborated logistics link and a partnership network allow us to send our elements anywhere in the world quickly without discrediting product quality.
A specific source of repute for FAMAGA is its staff members, each of whom contributes to common cause. We invite into our team only professionals, who already have experience in the field of factory-made equipment.
All items from FAMAGA are assured - we are responsible for the aftereffect of our work. At the moment, more than 10 million units of products have been provided, and this number is ascending every day. We are pleased that consumers choose FAMAGA again and again, and we strive to make more advanced and technologically advanced industrial equipment so as not to lower the bar.
To get some advice or book, call us by phone or write to the online chat on our official website. You can also forward a list of the required equipment to the email of corporation - we will contact you ourselves with a prepared commercial proposal from FAMAGA.
Standards | ISO 5599-1 |
Working pressure min./max. | 0 ... 16 bar |
Ambient temperature min./max. | 0 ... 80 °C |
Medium temperature min./max. | 0 ... 80 °C |
Medium | Compressed air |
Weight | 0,444 kg |
The min. control pressure must be adhered to, since otherwise faulty switching and valve failure may result! The pressure dew point must be at least 15 °C under ambient and medium temperature and may not exceed 3 °C . The oil content of compressed air must remain constant during the life cycle. Use only the approved oils from AVENTICS. Further information can be found in the “Technical information” document (available in the MediaCentre). |
Material |
---|
Base plate | Aluminum |
Seal | Acrylonitrile butadiene rubber |