We are not the manufacturer, authorised distributor or authorised representative of the Aventics (brand of Emerson) brand Worldwide. The private labels and part numbers shown on this website are the property of their respective owners.
Manufacturer
Aventics (brand of Emerson)
Country
Germany
Part number
R480147973
Description
Functional principle | double-acting |
Cushioning | pneumatically |
adjustable | |
Piston diameter | 40 mm |
Piston rod thread | M12x1,25 |
Standardization | ISO 15552 |
Stroke | 200 mm |
Sealing material | Fluorocaoutchouc |
Scraper | Fluorocaoutchouc |
Compressed air connection | G 1/4 |
Compressed air connection type | Internal thread |
Temperature resistance | Heat resistant |
Stock availability:
On request
If you are inspecting Aventics (brand of Emerson) R480147973, communicate with FAMAGA, the world's chief supplier of industrialized equipment. Our company has lasted for more than ten years - these are years of experience, which are depicted in the quality of products and personalseparate attention to each orderer. We cherish everyone, who liased with us - so, our regular customers obtain the most beneficial purchase terms and discounts on the industrial equipment market. Today, there are more than 4000 such buyers, and we constantly form new agreements. More than 600 purchases are terminated per day, because FAMAGA operates all over the planet Germany, United Kingdom, Costa Rica, Israel, Cape Verde, Peru, Philippines, Gambia, France, Senegal, Iceland, Colombia, Suriname, Ukraine, Mali, Guyana, Sierra Leone, Jamaica, Mexico, East Timor, Latvia, The Gambia, Malaysia, Sudan, Georgia, Monaco, Pakistan, Nicaragua, Malta, Sweden, Azerbaijan, Kuwait, South Sudan, Yemen, Zimbabwe, Poland, Ghana, Panama, Mauritania, China, Samoa, Bangladesh, Indonesia, Syria, Albania, Denmark, Switzerland, Egypt. A well-elaborated logistics bond and a partnership network guide us to send our goods anywhere in the earth immediately without compromising product quality.
A special source of good name for FAMAGA is its staff members, each of whom contributes to our work. We accept into our team only specialists, who already have experience in the direction of machine made streamlined equipment.
All products from FAMAGA are guaranteed - we are responsible for the outcome of our work. Now, more than 10 million units of products have been shipped, and this number is growing every day. We are proud that clients choose FAMAGA again and again, and we strive to make more developed and technologically advanced industrial equipment so as not to lower the bar.
To inquire or place an order, call us by phone or send a message to the online chat on our official website. You can also forward a list of the needful equipment to the email of firm - we will contact you ourselves with a made commercial proposal from FAMAGA.
Standards | ISO 15552 |
Compressed air connection | Internal thread |
Working pressure min./max. | 2 ... 10 bar |
Ambient temperature min./max. | -10 ... 150 °C |
Medium temperature min./max. | -10 ... 150 °C |
Medium | Compressed air |
Max. particle size | 50 µm |
Oil content of compressed air | 0 ... 5 mg/m³ |
Pressure for determining piston forces | 6.3 bar |
The pressure dew point must be at least 15 °C under ambient and medium temperature and may not exceed 3 °C . The oil content of compressed air must remain constant during the life cycle. Use only the approved oils from AVENTICS. Further information can be found in the “Technical information” document (available in the MediaCentre). |
Material |
---|
Cylinder tube | Aluminum, anodized |
Piston rod | Stainless steel |
Front cover | Die-cast aluminum |
End cover | Die-cast aluminum |
Seal | Fluorocaoutchouc |
Nut for piston rod | Steel, galvanized |
Scraper | Fluorocaoutchouc |