We are not the manufacturer, authorised distributor or authorised representative of the Aventics (brand of Emerson) brand Worldwide. The private labels and part numbers shown on this website are the property of their respective owners.
Manufacturer
Aventics (brand of Emerson)
Country
Germany
Part number
R480644586
Description
Piston rod modification | non-rotating, with front plate |
Functional principle | double-acting |
Cushioning | elastic |
Magnetic piston | with magnetic piston |
Piston diameter | 40 mm |
Standardization | ISO 15524 |
Stroke | 100 mm |
Sealing material | Polyurethane |
Scraper | Polyurethane |
Compressed air connection | G 1/8 |
Compressed air connection type | Internal thread |
Stock availability:
On request
If you are inspecting Aventics (brand of Emerson) R480644586, connect FAMAGA, the world's leading distributor of machine made equipment. Our company has functioned for more than ten years - these are cycles of experience, which are described in the quality of spare parts and personalseparate attention to each client. We understand everyone, who cooperated with us - hence, our regular consumers procure the most convenient purchase terms and discounts on the machine made streamlined equipment market. Today, there are more than 3500 such clients, and we constantly sign new agreements. More than 750 transactions are made per day, because FAMAGA delivers all over the world Germany, United Kingdom, Saudi Arabia, Cyprus, Tonga, Canada, South Africa, Brunei, Israel, Zambia, Malaysia, North Korea, Slovenia, Armenia, Ireland, Bosnia and Herzegovina, Burundi, Guyana, Ghana, Bhutan, Lebanon, Mauritania, Kuwait, Kiribati, Syria, Sierra Leone, Poland, Equatorial Guinea, Swaziland, Uruguay, Japan, East Timor, Czech Republic, Sudan, Uganda, Comoros, Eswatini, Andorra, Slovakia, India, Mali, Costa Rica, Thailand, Iraq, Argentina, Djibouti, Iceland, Paraguay. A well-elaborated logistics connection and a partnership network guide us to send our units anywhere in the globe with no delay without disreputing product quality.
A special source of good name for FAMAGA is its staff members, each of whom contributes to our work. We accept into our team only specialists, who already have experience in the field of factory-made equipment.
All outputs from FAMAGA are verified - we are responsible for the cause of our work. At the moment, more than 10 million units of products have been supplied, and this bulk is growing every day. We are pleased that purchasers choose FAMAGA again and again, and we are eager to make more progressive and technologically modern industrial equipment so as stay in control.
To inquire or book, contact us or send a message to the online chat on our official website. You can also send a list of the desirable equipment to the email of organization - we will contact you ourselves with a prepared commercial proposal from FAMAGA.
Standards | ISO 15524 |
Compressed air connection | Internal thread |
Ambient temperature min./max. | -20 ... 80 °C |
Medium temperature min./max. | -20 ... 80 °C |
Medium | Compressed air |
Max. particle size | 50 µm |
Oil content of compressed air | 0 ... 5 mg/m³ |
Pressure for determining piston forces | 6.3 bar |
The pressure dew point must be at least 15 °C under ambient and medium temperature and may not exceed 3 °C . The oil content of compressed air must remain constant during the life cycle. Use only the approved oils from AVENTICS. Further information can be found in the “Technical information” document (available in the MediaCentre). |
Material |
---|
Cylinder tube | Aluminum, anodized |
Piston rod | Stainless steel |
Front cover | Brass Aluminum |
End cover | Aluminum |
Seal | Nitrile butadiene rubber Polyurethane |
Front plate | Aluminum |
Guide rod | Stainless steel |
Scraper | Nitrile butadiene rubber Polyurethane |
See table for additional data on materials. |