We are not the manufacturer, authorised distributor or authorised representative of the Aventics (brand of Emerson) brand Worldwide. The private labels and part numbers shown on this website are the property of their respective owners.
Manufacturer
Aventics (brand of Emerson)
Country
Germany
Part number
R480041422
Description
Piston rod modification | through |
Functional principle | double-acting |
Cushioning | pneumatically |
adjustable | |
Magnetic piston | with magnetic piston |
Piston diameter | 32 mm |
Piston rod thread | M10x1,25 |
Standardization | ISO 15552 |
Stroke | 125 mm |
Sealing material | Polyurethane |
Scraper | Polyurethane |
Compressed air connection | G 1/8 |
Compressed air connection type | Internal thread |
Stock availability:
On request
If you are inspecting Aventics (brand of Emerson) R480041422, connect FAMAGA, the world's key distributor of manufacturing equipment. Our company has progressed for more than ten years - these are cycles of experience, which are described in the quality of merchandises and special attention to each consumer. We understand everyone, who conspired with us - hence, our regular consumers get the most desirable purchase forms and discounts on the machine made streamlined equipment market. At this time, there are more than 4000 such consumers, and we constantly compose new agreements. More than 700 proceedings are resolved per day, because FAMAGA delivers all over the world Germany, United Kingdom, Bolivia, Norway, Netherlands, South Africa, France, Morocco, Paraguay, Argentina, Vietnam, Tanzania, Singapore, Zambia, Burkina Faso, Canada, Malta, El Salvador, Thailand, Liberia, Mozambique, Dominica, Mongolia, Zimbabwe, Chad, Afghanistan, Malawi, Sweden, Equatorial Guinea, Fiji, Tajikistan, Ghana, Bosnia and Herzegovina, Turkmenistan, Iraq, Indonesia, Macedonia, Kenya, Kyrgyzstan, Laos, Niger, Burundi, Central African Republic, Georgia, Chile, Serbia, Greece, Bulgaria. A well-elaborated logistics bond and a partnership network let us to dispatch our products anywhere in the globe promptly without disreputing product quality.
A particular source of honor for FAMAGA is its employees, each of whom contributes to our work. We request into our team only specialists, who already have experience in the range of factory-made equipment.
All outputs from FAMAGA are guaranteed - we are responsible for the cause of our work. At the moment, more than 10 million units of products have been shipped, and this bulk is increasing every day. We are pleased that purchasers choose FAMAGA again and again, and we are happy to make more advanced and technologically modern industrial equipment so as not to lower the bar.
To consult or book, get in touch with us or send a message to the online chat on our official website. You can also dispatch a list of the required equipment to the email of corporation - we will contact you ourselves with a ready-made commercial proposal from FAMAGA.
Standards | ISO 15552 |
Compressed air connection | Internal thread |
Working pressure min./max. | 1,5 ... 10 bar |
Ambient temperature min./max. | -20 ... 80 °C |
Medium temperature min./max. | -20 ... 80 °C |
Medium | Compressed air |
Max. particle size | 50 µm |
Oil content of compressed air | 0 ... 5 mg/m³ |
Pressure for determining piston forces | 6.3 bar |
The pressure dew point must be at least 15 °C under ambient and medium temperature and may not exceed 3 °C . The oil content of compressed air must remain constant during the life cycle. Use only the approved oils from AVENTICS. Further information can be found in the “Technical information” document (available in the MediaCentre). |
Material |
---|
Cylinder tube | Aluminum, anodized |
Piston rod | Stainless steel |
Front cover | Die-cast aluminum |
End cover | Die-cast aluminum |
Seal | Polyurethane |
Nut for piston rod | Steel, galvanized |
Scraper | Polyurethane |