We are not the manufacturer, authorised distributor or authorised representative of the Aventics (brand of Emerson) brand Worldwide. The private labels and part numbers shown on this website are the property of their respective owners.
Manufacturer
Aventics (brand of Emerson)
Country
Germany
Part number
R422000124
Description
Actuating control | double solenoid |
Switching principle | 5/3 |
Version | Spool valve, positive overlapping |
Housing | Polyamide fiber-glass reinforced |
Sealing material | Acrylonitrile butadiene rubber,Hydrogenated nitrile butadiene rubber |
Connector standard | ISO 15217 |
Protection class | IP65 |
Port size | ISO 15217, form C |
Type | Plug |
Nominal flow Qn | 1300 l/min |
Compressed air connection input | G 1/4 |
Compressed air connection output | G 1/4 |
Operational voltage AC at 50 Hz | 24 V |
Operational voltage AC at 60 Hz | 24 V |
Activation | Electrically |
Stock availability:
On request
If you are questing Aventics (brand of Emerson) R422000124, make contact with FAMAGA, the world's key provider of factory-made equipment. Our company has lasted for more than ten years - these are cycles of experience, which are depicted in the quality of spare parts and particular attention to each consumer. We admire everyone, who worked with us - therefore, our regular purchasers obtain the most flexible purchase forms and discounts on the industrial equipment market. Nowadays, there are more than 4000 such buyers, and we constantly arrange new agreements. More than 650 transactions are made per day, because FAMAGA delivers all over the world Germany, United Kingdom, France, Congo, Yemen, Malta, Iceland, Belgium, United Arab Emirates, Lebanon, Madagascar, Denmark, Bosnia and Herzegovina, East Timor, Greece, Thailand, Czech Republic, Jordan, Cape Verde, Austria, Bulgaria, Rwanda, Azerbaijan, El Salvador, Kazakhstan, Sweden, Niger, Brazil, Chile, New Zealand, Hungary, Kuwait, Namibia, Israel, North Korea, Philippines, Moldova, Togo, Lithuania, Sudan, Turkey, Haiti, Argentina, Kiribati, Mongolia, Afghanistan. A well-developed logistics bond and a partnership network allow us to ship our goods anywhere in the globe promptly without discrediting product quality.
A particular source of honor for FAMAGA is its staff members, each of whom contributes to our work. We invite into our team only professionals, who already have experience in the range of industrial equipment.
All items from FAMAGA are assured - we are responsible for the outcome of our work. Nowadays, more than 10 million units of products have been shipped, and this bulk is amounting every day. We are proud that clients choose FAMAGA again and again, and we are eager to make more advanced and technologically modern industrial equipment so as not to lower the bar.
To get some advice or book, call us by phone or write a message to the online chat on our official website. You can also send a list of the desirable equipment to the email of our company - we will contact you ourselves with a prepared commercial proposal from FAMAGA.
Version | Spool valve, positive overlapping |
Activation | Electrically |
Sealing principle | Soft sealing |
Working pressure min./max. | See table |
Control pressure min./max. | 3 ... 10 bar |
Ambient temperature min./max. | -10 ... 50 °C |
Medium temperature min./max. | -10 ... 50 °C |
Medium | Compressed air |
Max. particle size | 5 µm |
Oil content of compressed air | 0 ... 5 mg/m³ |
Nominal flow Qn | 1300 l/min |
Connector standard | ISO 15217 |
Protection class with connection | IP65 |
Duty cycle | 100 % |
Typ. switch-on time | 12 ms |
Typ. switch-off time | 13 ms |
Generic emission standard in accordance with | EN 50081:1992 |
Mounting on manifold strip | P-strip |
Mounting screw tightening torque | 2,5 Nm |
Weight | 0,278 kg |
The min. control pressure must be adhered to, since otherwise faulty switching and valve failure may result! The pressure dew point must be at least 15 °C under ambient and medium temperature and may not exceed 3 °C . The oil content of compressed air must remain constant during the life cycle. Use only the approved oils from AVENTICS. Further information can be found in the “Technical information” document (available in the MediaCentre). |
Material |
---|
Housing | Polyamide fiber-glass reinforced |
Seals | Acrylonitrile butadiene rubber Hydrogenated nitrile butadiene rubber |
Front plate | Polyamide fiber-glass reinforced |
Threaded bushing | Brass Die cast zinc, nickel-plated chrome-plated |