We are not the manufacturer, authorised distributor or authorised representative of the Aventics (brand of Emerson) brand Worldwide. The private labels and part numbers shown on this website are the property of their respective owners.
Manufacturer
Aventics (brand of Emerson)
Country
Germany
Part number
R412014236
Description
Functional principle | double-acting |
Cushioning | pneumatically |
adjustable | |
Magnetic piston | with magnetic piston |
Piston diameter | 32 mm |
Piston rod thread | M10x1,25 |
Standardization | ISO 15552 |
Stroke | 320 mm |
Sealing material | Fluorocaoutchouc |
Scraper | Fluorocaoutchouc |
Compressed air connection | G 1/8 |
Compressed air connection type | Internal thread |
Temperature resistance | Heat resistant |
Stock availability:
On request
If you are inspecting Aventics (brand of Emerson) R412014236, make contact with FAMAGA, the world's main producer of streamlined equipment. Our company has worked for more than ten years - these are ages of experience, which are symbolized in the quality of merchandises and personalseparate attention to each buyer. We praise everyone, who joined with us - thus, our regular consumers get the most flexible purchase conditions and discounts on the industrial equipment market. Today, there are more than 4000 such clients, and we constantly sign new agreements. More than 700 transactions are made per day, because FAMAGA works all over the globe Germany, United Kingdom, Italy, Azerbaijan, Fiji, Cambodia, Finland, Australia, East Timor, Paraguay, Colombia, Tonga, Burma, Peru, Hungary, Bhutan, Tunisia, Sweden, Nicaragua, Bulgaria, Netherlands, Oman, Kuwait, Equatorial Guinea, Croatia, Egypt, Burkina Faso, South Sudan, Togo, Russia, Armenia, Jamaica, Albania, Malaysia, Laos, United Arab Emirates, Swaziland, Yemen, Costa Rica, Philippines, Mozambique, Ireland, Kazakhstan, Switzerland, The Gambia, Qatar, Moldova. A advanced logistics series and a partnership network guide us to send our units anywhere in the earth on-time without disreputing product quality.
A special source of pride for FAMAGA is its workers, each of whom contributes to our work. We accept into our team only specialists, who already have experience in the range of machine made streamlined equipment.
All goods from FAMAGA are verified - we are responsible for the result of our work. Nowadays, more than 10 million units of products have been delivered, and this number is growing every day. We are proud that purchasers choose FAMAGA again and again, and we are eager to make more exceptional and technologically developed industrial equipment so as to stay on the top.
To consult or order, call us by phone or send a message to the online chat on our official website. You can also dispatch a list of the needful equipment to the email of corporation - we will contact you ourselves with a ready-made commercial proposal from FAMAGA.
Standards | ISO 15552 |
Compressed air connection | Internal thread |
Working pressure min./max. | 2 ... 10 bar |
Ambient temperature min./max. | -10 ... 120 °C |
Medium temperature min./max. | -10 ... 120 °C |
Medium | Compressed air |
Max. particle size | 50 µm |
Oil content of compressed air | 0 ... 5 mg/m³ |
Pressure for determining piston forces | 6.3 bar |
The pressure dew point must be at least 15 °C under ambient and medium temperature and may not exceed 3 °C . The oil content of compressed air must remain constant during the life cycle. Use only the approved oils from AVENTICS. Further information can be found in the “Technical information” document (available in the MediaCentre). |
Material |
---|
Cylinder tube | Aluminum, anodized |
Piston rod | Stainless steel |
Front cover | Die-cast aluminum |
End cover | Die-cast aluminum |
Seal | Fluorocaoutchouc Polyurethane |
Nut for piston rod | Steel, galvanized |
Scraper | Fluorocaoutchouc |