We are not the manufacturer, authorised distributor or authorised representative of the Aventics (brand of Emerson) brand Worldwide. The private labels and part numbers shown on this website are the property of their respective owners.
Manufacturer
Aventics (brand of Emerson)
Country
Germany
Part number
0820039262
Description
Standardization | ISO 15407-1 |
Frame size | 18 mm |
Switching principle | 5/3 |
Version | Spool valve, positive overlapping |
Housing | Aluminum |
Sealing material | Acrylonitrile butadiene rubber,Hydrogenated acrylonitrile butadiene rubber |
Connector standard | ISO 15217 |
Protection class | IP65 |
Port size | ISO 15217, form C |
Type | Plug |
Nominal flow Qn | 250 l/min |
Compressed air connection input | VDMA 02 base plate |
Compressed air connection output | VDMA 02 base plate |
DC operating voltage | 24 V |
Stock availability:
On request
If you are inspecting Aventics (brand of Emerson) 0820039262, contact FAMAGA, the world's influential company of mechanized equipment. Our company has existed for more than ten years - these are years of experience, which are described in the quality of products and individual attention to each orderer. We cherish everyone, who cooperated with us - therefore, our regular buyers pick up the most convenient purchase conditions and discounts on the manufacturing equipment market. Now, there are more than 4000 such buyers, and we constantly form new agreements. More than 650 transactions are made per day, because FAMAGA supplies all over the planet Germany, United Kingdom, France, El Salvador, Belize, Dominican Republic, Mali, Sweden, Algeria, Latvia, Guinea, Panama, Singapore, Lithuania, Poland, Eritrea, Croatia, Bangladesh, Ecuador, Swaziland, Gambia, Malawi, New Zealand, Zimbabwe, Andorra, Hungary, Kyrgyzstan, Burundi, India, Jordan, Serbia, North Korea, Greece, Denmark, Samoa, Kenya, Australia, Iran, Sierra Leone, Tonga, Paraguay, Slovakia, Indonesia, Macedonia, Cameroon, Eswatini, Egypt. A well-developed logistics link and a partnership network allow us to conduct our goods anywhere in the earth with no delay without compromising product quality.
A special source of pride for FAMAGA is its workers, each of whom contributes to our work. We request into our team only specialists, who already have experience in the field of factory-made equipment.
All outcomes from FAMAGA are ensured - we are responsible for the outcome of our work. At this moment, more than 10 million units of products have been delivered, and this number is rising every day. We are proud that consumers choose FAMAGA again and again, and we strive to make more progressive and technologically innovative industrial equipment so as not to lower the bar.
To ask a question or place an order, call us by phone or write to the online chat on our site. You can also direct a list of the required equipment to the email of corporation - we will contact you ourselves with a ready-made commercial proposal from FAMAGA.
Version | Spool valve, positive overlapping |
Sealing principle | Soft sealing |
Blocking principle | Base plate principle, multiple |
Connection type | Plate connection |
Standards | ISO 15407-1, 18 mm |
Connector standard | ISO 15217 |
Working pressure min./max. | 2,2 ... 10 bar |
Control pressure min./max. | 2,2 ... 10 bar |
Ambient temperature min./max. | 0 ... 50 °C |
Medium temperature min./max. | 0 ... 60 °C |
Medium | Compressed air |
Max. particle size | 5 µm |
Oil content of compressed air | 0 ... 5 mg/m³ |
Nominal flow Qn | See table |
Protection class with connection | IP65 |
Protection class Without valve plug connector | See table |
Duty cycle | 100 % |
Typ. switch-on time | See table |
Typ. switch-off time | See table |
Mounting screw | M3 |
Weight | 0,17 kg |
The min. control pressure must be adhered to, since otherwise faulty switching and valve failure may result! The pressure dew point must be at least 15 °C under ambient and medium temperature and may not exceed 3 °C . The oil content of compressed air must remain constant during the life cycle. Use only the approved oils from AVENTICS. Further information can be found in the “Technical information” document (available in the MediaCentre). |
Housing | Aluminum, anodized |
Seals | Acrylonitrile butadiene rubber Hydrogenated acrylonitrile butadiene rubber Acrylonitrile butadiene rubber |
Front plate | Polyamide |
Threaded bushing | Aluminum |