We are not the manufacturer, authorised distributor or authorised representative of the Aventics (brand of Emerson) brand Worldwide. The private labels and part numbers shown on this website are the property of their respective owners.
Manufacturer
Aventics (brand of Emerson)
Country
Germany
Part number
5727485302
Description
Actuating control | double solenoid |
Switching principle | 5/2 |
Version | Diaphragm poppet valve |
Housing | Polyoxymethylene |
Sealing material | Acrylonitrile butadiene rubber |
Connector standard | EN 175301-803:2006 |
Protection class | IP65 |
Port size | EN 175301-803, form A |
Type | Plug |
Nominal flow Qn | 1100 l/min |
Compressed air connection input | Ø 10x1 |
Compressed air connection output | Ø 10x1 |
Activation | Electrically |
Stock availability:
On request
If you are questing Aventics (brand of Emerson) 5727485302, get in touch with FAMAGA, the world's dominant distributor of industrial equipment. Our company has functioned for more than ten years - these are cycles of experience, which are illustrated in the quality of products and individual attention to each buyer. We admire everyone, who conspired with us - therefore, our regular purchasers pick up the most flexible purchase forms and discounts on the factory-made equipment market. At this moment, there are more than 4500 such clients, and we constantly make new agreements. More than 650 agreements are achieved per day, because FAMAGA delivers all over the earth Germany, United Kingdom, The Bahamas, Kenya, Switzerland, Liberia, Comoros, Dominican Republic, Honduras, Sudan, Zambia, Jordan, Mozambique, Australia, Tunisia, Nigeria, Eritrea, Vietnam, Bosnia and Herzegovina, Malaysia, Georgia, Malawi, El Salvador, Peru, Swaziland, Morocco, Bolivia, Guatemala, Togo, Hungary, Luxembourg, Seychelles, Albania, Czech Republic, Botswana, Russia, Ecuador, Eswatini, Serbia, Dominica, Brunei, Algeria, United States, Cape Verde, Finland, Bulgaria. A advanced logistics chains and a partnership network help us to conduct our goods anywhere in the world immediately without discrediting product quality.
A particular source of good name for FAMAGA is its staff members, each of whom contributes to common cause. We propose into our team only professionals, who already have experience in the field of machine made streamlined equipment.
All items from FAMAGA are assured - we are responsible for the result of our work. Nowadays, more than 10 million units of products have been provided, and this amount is ascending every day. We are proud that clients choose FAMAGA again and again, and we are eager to make more progressive and technologically innovative industrial equipment so as stay in control.
To get some advice or order, call us by phone or write a message to the online chat on our site. You can also dispatch a list of the needful equipment to the email of firm - we will contact you ourselves with a prepared commercial proposal from FAMAGA.
Version | Diaphragm poppet valve |
Activation | Electrically |
Pilot | Internal |
Sealing principle | Soft sealing |
Blocking principle | Plate principle Single base plate principle |
Working pressure min./max. | 1,5 ... 10 bar |
Ambient temperature min./max. | -15 ... 50 °C |
Medium temperature min./max. | -15 ... 50 °C |
Medium | Compressed air |
Max. particle size | 50 µm |
Oil content of compressed air | 0 ... 5 mg/m³ |
Nominal flow Qn | 1100 l/min |
Connector standard | EN 175301-803:2006 |
Protection class with connection | IP65 |
Reverse polarity protection | Protected against polarity reversal |
Compatibility index | See table |
Duty cycle | 100 % |
Typ. switch-on time | 40 ms |
Mounting on manifold strip | PRS strip |
Weight | See table |
The min. control pressure must be adhered to, since otherwise faulty switching and valve failure may result! The pressure dew point must be at least 15 °C under ambient and medium temperature and may not exceed 3 °C . The oil content of compressed air must remain constant during the life cycle. Use only the approved oils from AVENTICS. Further information can be found in the “Technical information” document (available in the MediaCentre). |
ATEX optional: ATEX version can be produced by combining the basic valve without coil with an ATEX coil. ATEX ID: see ATEX coils catalog page. |
Material |
---|
Housing | Polyoxymethylene |
Seals | Acrylonitrile butadiene rubber |