We are not the manufacturer, authorised distributor or authorised representative of the Aventics (brand of Emerson) brand Worldwide. The private labels and part numbers shown on this website are the property of their respective owners.
Manufacturer
Aventics (brand of Emerson)
Country
Germany
Part number
дюйм - R480176160
Description
Piston rod modification | through |
Functional principle | double-acting |
Cushioning | pneumatically,pneumatically |
adjustable | |
Magnetic piston | with magnetic piston |
Piston diameter | 32 mm |
Piston rod thread | 7/16-20 UNF |
Stroke | 50.8 mm |
Sealing material | Polyurethane |
Scraper | Polyurethane |
Compressed air connection | 1/8 NPT |
Compressed air connection type | Internal thread |
Stock availability:
On request
If you are questing Aventics (brand of Emerson) дюйм - R480176160, make contact with FAMAGA, the world's top company of industrial equipment. Our company has worked for more than ten years - these are cycles of experience, which are depicted in the quality of spare parts and private attention to each consumer. We admire everyone, who liased with us - therefore, our regular buyers procure the most favorable purchase forms and discounts on the factory-made equipment market. At this time, there are more than 4000 such buyers, and we constantly compose new agreements. More than 650 contracts are concluded per day, because FAMAGA operates all over the world Germany, United Kingdom, Belarus, Central African Republic, Sweden, Slovakia, Samoa, Panama, Antigua and Barbuda, Gambia, Cuba, Bahamas, Austria, Cyprus, South Sudan, Ghana, Colombia, Iraq, Ireland, Suriname, Yemen, Latvia, Moldova, Estonia, Singapore, Comoros, Romania, Djibouti, Nigeria, Japan, Dominica, Syria, Croatia, Zimbabwe, Tanzania, Nicaragua, Vietnam, Jordan, Seychelles, Czech Republic, El Salvador, Australia, Tajikistan, Niger, Finland, Poland, Qatar, Costa Rica, Jamaica, Pakistan. A well-elaborated logistics bond and a partnership network guide us to deliver our elements anywhere in the world promptly without undermining product quality.
A particular source of pride for FAMAGA is its team members, each of whom contributes to our work. We invite into our team only professionals, who already have experience in the sphere of factory-made equipment.
All products from FAMAGA are guaranteed - we are responsible for the outcome of our work. At the moment, more than 10 million units of products have been supplied, and this number is rising every day. We are glad that clients choose FAMAGA again and again, and we are glad to make more exceptional and technologically advanced industrial equipment so as not to lower the bar.
To get some advice or order, call us by phone or write to the online chat on our official website. You can also direct a list of the required equipment to the email of firm - we will contact you ourselves with a ready-made commercial proposal from FAMAGA.
Compressed air connection | Internal thread |
Working pressure min./max. | 2 ... 10 bar |
Ambient temperature min./max. | -20 ... 80 °C |
Medium temperature min./max. | -20 ... 80 °C |
Medium | Compressed air |
Max. particle size | 50 µm |
Oil content of compressed air | 0 ... 5 mg/m³ |
Pressure for determining piston forces | 6.3 bar |
The pressure dew point must be at least 15 °C under ambient and medium temperature and may not exceed 3 °C . The oil content of compressed air must remain constant during the life cycle. Use only the approved oils from AVENTICS. Further information can be found in the “Technical information” document (available in the MediaCentre). |
Material |
---|
Cylinder tube | Aluminum, anodized |
Piston rod | Stainless steel |
Front cover | Die-cast aluminum |
End cover | Die-cast aluminum |
Seal | Polyurethane |
Nut for piston rod | Steel, galvanized |
Scraper | Polyurethane |