Aventics (brand of Emerson) 0820037325
  Aventics (brand of Emerson) 0820037325

We are not the manufacturer, authorised distributor or authorised representative of the Aventics (brand of Emerson) brand Worldwide. The private labels and part numbers shown on this website are the property of their respective owners.

0820037325 Aventics (brand of Emerson)

Manufacturer

Aventics (brand of Emerson)

Country

Germany

Part number

0820037325

Description

Standardization ISO 15407-1
Frame size 18 mm
Switching principle 2x3/2
Version Spool valve, positive overlapping
Housing Aluminum
Sealing material Acrylonitrile butadiene rubber,Hydrogenated acrylonitrile butadiene rubber
Connector standard ISO 15217
Protection class IP65
Port size ISO 15217, form C
Type Plug
Nominal flow Qn 450 l/min
Compressed air connection input VDMA 02 base plate
Compressed air connection output VDMA 02 base plate
Operational voltage AC at 50 Hz 230 V
Operational voltage AC at 60 Hz 230 V

Stock availability:

On request

Price: On request

Order

Several positions are needed?

Send your request on email:

Worldwide delivery services:
fedex dhl ups
Ways of payment:
wire transfer paypal

Specifications 0820037325

If you are questing Aventics (brand of Emerson) 0820037325, reach FAMAGA, the world's leading provider of industrialized equipment. Our company has worked for more than ten years - these are years of experience, which are described in the quality of outputs and special attention to each buyer. We esteem everyone, who collaborated with us - therefore, our regular consumers procure the most favorable purchase terms and discounts on the factory-made equipment market. Now, there are more than 4000 such consumers, and we constantly compose new agreements. More than 650 contracts are concluded per day, because FAMAGA works all over the planet . A well-elaborated logistics network and a partnership network assist us to send our products anywhere in the planet with no delay without discrediting product quality.

A special source of good name for FAMAGA is its staff members, each of whom contributes to common cause. We invite into our team only specialists, who already have experience in the field of factory-made equipment.

All spare parts from FAMAGA are assured - we are responsible for the result of our work. Now, more than 10 million units of products have been delivered, and this number is ascending every day. We are glad that customers choose FAMAGA again and again, and we are happy to make more developed and technologically innovative industrial equipment so as not to lower the bar.

To get some advice or make a request, call us by phone or send a message to the online chat on our site. You can also direct a list of the required equipment to the email of corporation - we will contact you ourselves with a made commercial proposal from FAMAGA.

Features 0820037325

Version Spool valve, positive overlapping
Pilot Internal
Sealing principle Soft sealing
Blocking principle Base plate principle, multiple
Connection type Plate connection
Standards ISO 15407-1, 18 mm
Connector standard ISO 15217
Working pressure min./max. 2,2 ... 10 bar
Control pressure min./max. 2,2 ... 10 bar
Ambient temperature min./max. 0 ... 50 °C
Medium temperature min./max. 0 ... 60 °C
Medium Compressed air
Max. particle size 5 µm
Oil content of compressed air 0 ... 5 mg/m³
Nominal flow Qn 450 l/min
Protection class with connection IP65
Duty cycle 100 %
Typ. switch-on time 12 ms
Typ. switch-off time 24 ms
Mounting screw M3
Weight 0,16 kg
The min. control pressure must be adhered to, since otherwise faulty switching and valve failure may result! The pressure dew point must be at least 15 °C under ambient and medium temperature and may not exceed 3 °C . The oil content of compressed air must remain constant during the life cycle. Use only the approved oils from AVENTICS. Further information can be found in the “Technical information” document (available in the MediaCentre).
Housing Aluminum, anodized
Seals Acrylonitrile butadiene rubber Hydrogenated acrylonitrile butadiene rubber
Front plate Polyamide