We are not the manufacturer, authorised distributor or authorised representative of the Aventics (brand of Emerson) brand Worldwide. The private labels and part numbers shown on this website are the property of their respective owners.
Manufacturer
Aventics (brand of Emerson)
Country
Germany
Part number
R480147966
Description
Functional principle | double-acting |
Cushioning | pneumatically |
adjustable | |
Piston diameter | 32 mm |
Piston rod thread | M10x1,25 |
Standardization | ISO 15552 |
Stroke | 400 mm |
Sealing material | Fluorocaoutchouc |
Scraper | Fluorocaoutchouc |
Compressed air connection | G 1/8 |
Compressed air connection type | Internal thread |
Temperature resistance | Heat resistant |
Stock availability:
On request
If you are looking for Aventics (brand of Emerson) R480147966, make contact with FAMAGA, the world's prime supplier of industrialized equipment. Our company has lasted for more than ten years - these are years of experience, which are expressed in the quality of merchandises and private attention to each orderer. We praise everyone, who conspired with us - so, our regular consumers obtain the most attractive purchase terms and discounts on the industrial equipment market. Today, there are more than 4000 such buyers, and we constantly sign new agreements. More than 600 purchases are terminated per day, because FAMAGA operates all over the planet Germany, United Kingdom, Panama, Lesotho, Colombia, East Timor, Thailand, Libya, The Gambia, Botswana, Philippines, Syria, Cyprus, Pakistan, Fiji, Liberia, Djibouti, El Salvador, Mali, Belarus, Burkina Faso, Namibia, Eritrea, The Bahamas, Ireland, Egypt, Suriname, Equatorial Guinea, Afghanistan, Costa Rica, Mozambique, Turkey, Luxembourg, Brunei, Mauritania, Madagascar, Togo, Qatar, Mongolia, Dominica, Ghana, Nepal, Norway. A well-shaped logistics bond and a partnership network guide us to ship our units anywhere in the globe immediately without disreputing product quality.
A special source of honor for FAMAGA is its personnel, each of whom contributes to our work. We request into our team only specialists, who already have experience in the range of factory-made equipment.
All products from FAMAGA are verified - we are responsible for the outcome of our work. Now, more than 10 million units of products have been shipped, and this number is ascending every day. We are proud that purchasers choose FAMAGA again and again, and we are eager to make more developed and technologically advanced industrial equipment so as not to lower the bar.
To ask a question or place an order, call us by phone or send a message to the online chat on our official website. You can also dispatch a list of the desirable equipment to the email of firm - we will contact you ourselves with a made commercial proposal from FAMAGA.
Standards | ISO 15552 |
Compressed air connection | Internal thread |
Working pressure min./max. | 2 ... 10 bar |
Ambient temperature min./max. | -10 ... 150 °C |
Medium temperature min./max. | -10 ... 150 °C |
Medium | Compressed air |
Max. particle size | 50 µm |
Oil content of compressed air | 0 ... 5 mg/m³ |
Pressure for determining piston forces | 6.3 bar |
The pressure dew point must be at least 15 °C under ambient and medium temperature and may not exceed 3 °C . The oil content of compressed air must remain constant during the life cycle. Use only the approved oils from AVENTICS. Further information can be found in the “Technical information” document (available in the MediaCentre). |
Material |
---|
Cylinder tube | Aluminum, anodized |
Piston rod | Stainless steel |
Front cover | Die-cast aluminum |
End cover | Die-cast aluminum |
Seal | Fluorocaoutchouc |
Nut for piston rod | Steel, galvanized |
Scraper | Fluorocaoutchouc |