We are not the manufacturer, authorised distributor or authorised representative of the Aventics (brand of Emerson) brand Worldwide. The private labels and part numbers shown on this website are the property of their respective owners.
Manufacturer
Aventics (brand of Emerson)
Country
Germany
Part number
R480627639
Description
Functional principle | double-acting |
Cushioning | pneumatically |
adjustable | |
Magnetic piston | with magnetic piston |
Piston diameter | 200 mm |
Piston rod thread | M36x2 |
Standardization | ISO 15552 |
Stroke | 320 mm |
Sealing material | Fluorocaoutchouc |
Scraper | Fluorocaoutchouc |
Compressed air connection | G 3/4 |
Compressed air connection type | Internal thread |
Temperature resistance | Heat resistant |
Stock availability:
On request
If you are pursuing Aventics (brand of Emerson) R480627639, call FAMAGA, the world's central vendor of streamlined equipment. Our company has operated for more than ten years - these are cycles of experience, which are expressed in the quality of merchandises and particular attention to each customer. We value everyone, who cooperated with us - thus, our regular purchasers pick up the most desirable purchase terms and discounts on the industrial equipment market. Today, there are more than 4000 such customers, and we constantly compose new agreements. More than 700 purchases are terminated per day, because FAMAGA delivers all over the globe Germany, United Kingdom, Botswana, Benin, Cyprus, Ecuador, Liberia, Singapore, Nicaragua, Papua New Guinea, Syria, Mauritius, Japan, North Korea, Fiji, Madagascar, Canada, Belgium, Sierra Leone, Zimbabwe, Chile, Bangladesh, Pakistan, Indonesia, Russia, Qatar, Bosnia and Herzegovina, Vietnam, Afghanistan, Hungary, Djibouti, Burkina Faso, Kazakhstan, Poland, Uganda, South Korea, Yemen, Serbia, Laos, Nepal, Czech Republic, Morocco, Zambia, Cape Verde, Mauritania, Costa Rica, Croatia, Ireland. A advanced logistics chains and a partnership network guide us to conduct our goods anywhere in the earth promptly without damaging product quality.
A specific source of dignity for FAMAGA is its workers, each of whom contributes to our work. We call into our team only specialists, who already have experience in the sphere of machine made streamlined equipment.
All spare parts from FAMAGA are affirmed - we are responsible for the cause of our work. Nowadays, more than 10 million units of products have been shipped, and this number is amounting every day. We are proud that clients choose FAMAGA again and again, and we are pleased to make more exceptional and technologically advanced industrial equipment so as stay in control.
To get some advice or place an order, call us by phone or send a message to the online chat on our official website. You can also direct a list of the needful equipment to the email of corporation - we will contact you ourselves with a made commercial proposal from FAMAGA.
Standards | ISO 15552 |
Compressed air connection | Internal thread |
Working pressure min./max. | 2 ... 10 bar |
Ambient temperature min./max. | -10 ... 120 °C |
Medium temperature min./max. | -10 ... 120 °C |
Medium | Compressed air |
Max. particle size | 50 µm |
Oil content of compressed air | 0 ... 5 mg/m³ |
Pressure for determining piston forces | 6.3 bar |
The pressure dew point must be at least 15 °C under ambient and medium temperature and may not exceed 3 °C . The oil content of compressed air must remain constant during the life cycle. Use only the approved oils from AVENTICS. Further information can be found in the “Technical information” document (available in the MediaCentre). |
Material |
---|
Cylinder tube | Aluminum, anodized |
Piston rod | Stainless steel |
Front cover | Die-cast aluminum |
End cover | Die-cast aluminum |
Seal | Fluorocaoutchouc |
Nut for piston rod | Steel, galvanized |
Scraper | Fluorocaoutchouc |
Tie-rods | Stainless steel |