We are not the manufacturer, authorised distributor or authorised representative of the Aventics (brand of Emerson) brand Worldwide. The private labels and part numbers shown on this website are the property of their respective owners.
Manufacturer
Aventics (brand of Emerson)
Country
Germany
Part number
R412007216
Description
Parts | Filter pressure regulator |
Condensate drain | fully automatic, open without pressure |
Relieving exhaust | with relieving air exhaust |
filter porosity | 5 µm |
Pressure gauge | with pressure gauge |
inspection glass | with window |
lockable | lockable |
Housing | Polyamide |
Reservoir | Die cast zinc |
Sealing material | Acrylonitrile butadiene rubber |
suitable for ATEX | |
Nominal flow Qn | 5100 l/min |
Compressed air connection | G 1/2 |
Stock availability:
On request
If you are inspecting Aventics (brand of Emerson) R412007216, contact FAMAGA, the world's main distributor of factory-made equipment. Our company has progressed for more than ten years - these are years of experience, which are described in the quality of merchandises and special attention to each buyer. We admire everyone, who conspired with us - so, our regular customers procure the most desirable purchase terms and discounts on the machine made streamlined equipment market. At this time, there are more than 4500 such customers, and we constantly form new agreements. More than 650 purchases are terminated per day, because FAMAGA delivers all over the world Germany, United Kingdom, Oman, Grenada, Algeria, Swaziland, Afghanistan, Bulgaria, Georgia, Austria, East Timor, Senegal, Switzerland, Niger, Brazil, Argentina, Estonia, Thailand, Equatorial Guinea, Bosnia and Herzegovina, Samoa, Belize, Kenya, Turkmenistan, Togo, Jordan, Zambia, Tanzania, Mauritania, Nigeria, Guatemala, Tonga, Israel, Lithuania, Kyrgyzstan, Eswatini, Malta, Serbia, Yemen, Bangladesh, Luxembourg. A well-elaborated logistics chains and a partnership network assist us to deliver our elements anywhere in the world quickly without disreputing product quality.
A specific source of honor for FAMAGA is its workers, each of whom contributes to common cause. We accept into our team only professionals, who already have experience in the field of machine made streamlined equipment.
All outcomes from FAMAGA are guaranteed - we are responsible for the cause of our work. At the moment, more than 10 million units of products have been provided, and this number is growing every day. We are proud that users choose FAMAGA again and again, and we are happy to make more advanced and technologically modern industrial equipment so as not to lower the bar.
To inquire or place an order, phone us or send a message to the online chat on our site. You can also dispatch a list of the required equipment to the email of corporation - we will contact you ourselves with a ready-made commercial proposal from FAMAGA.
Version | 1-part, Can be assembled into blocks |
Parts | Filter pressure regulator |
Mounting orientation | vertical |
Certificates | suitable for ATEX |
Working pressure min./max. | 1,5 ... 16 bar |
Ambient temperature min./max. | -10 ... 50 °C |
Medium temperature min./max. | -10 ... 50 °C |
Medium | Compressed air Neutral gases |
Nominal flow Qn | 5100 l/min |
Regulator type | Diaphragm-type pressure regulator |
Regulator function | with relieving air exhaust |
Adjustment range min./max. | See table |
Pressure supply | single |
Filter reservoir volume | 49 cm³ |
Filter element | exchangeable |
Weight | See table |
The pressure dew point must be at least 15 °C under ambient and medium temperature and may not exceed 3 °C . Note: Polycarbonate reservoirs are susceptible to solvents, supplementary information can be found at "Customer information". Suitable for use in Ex zones 1, 2, 21, 22. A change in the flow direction (from air supply on the left to air supply on the right) occurs by rotating installation by 180° about the vertical axis. Please see the operating instructions for further details. Also suitable for separation of fluid oil or water due to the design. | |
Max. achievable compressed air class acc. to ISO 8573-1:2010 | 6 : 7 : - |
Material |
---|
Housing | Polyamide |
Front plate | Acrylonitrile butadiene styrene |
Seals | Acrylonitrile butadiene rubber |
Threaded bushing | Die cast zinc |
Reservoir | Polycarbonate Die cast zinc |
Protective guard | Polyamide |
Filter insert | Polyethylene |