We are not the manufacturer, authorised distributor or authorised representative of the Aventics (brand of Emerson) brand Worldwide. The private labels and part numbers shown on this website are the property of their respective owners.
Manufacturer
Aventics (brand of Emerson)
Country
Germany
Part number
0822395900
Description
Piston rod modification | non-rotating,Optionally through (hollow) |
Functional principle | double-acting |
Cushioning | elastic |
Magnetic piston | with magnetic piston |
Piston diameter | 50 mm |
Piston rod thread | M10 |
Standardization | NFE 49004 |
Stroke | 5 mm |
Sealing material | Polyurethane |
Scraper | Polyurethane |
Compressed air connection | G 1/8 |
Compressed air connection type | Internal thread |
Stock availability:
On request
If you are looking for Aventics (brand of Emerson) 0822395900, reach FAMAGA, the world's primary provider of factory-made equipment. Our company has worked for more than ten years - these are cycles of experience, which are illustrated in the quality of outputs and personalseparate attention to each buyer. We esteem everyone, who collaborated with us - therefore, our regular purchasers get the most helpful purchase conditions and discounts on the factory-made equipment market. At this time, there are more than 4000 such purchasers, and we constantly compose new agreements. More than 750 purchases are terminated per day, because FAMAGA works all over the world Germany, United Kingdom, Kuwait, Egypt, Gambia, Brazil, Belgium, Cyprus, Belize, Palestine, India, Grenada, Togo, Eritrea, Bolivia, Azerbaijan, South Korea, Bulgaria, Pakistan, Australia, Indonesia, Denmark, Bosnia and Herzegovina, Tonga, Uzbekistan, China, Ukraine, Mauritania, Macedonia, Namibia, Antigua and Barbuda, Philippines, Chile, Albania, Rwanda, Panama, Malta, Mongolia, Sudan, Thailand, Equatorial Guinea, Laos. A well-built logistics system and a partnership network assist us to deliver our elements anywhere in the planet promptly without disreputing product quality.
A particular source of good name for FAMAGA is its employees, each of whom contributes to common cause. We call into our team only experts, who already have experience in the field of factory-made equipment.
All items from FAMAGA are guaranteed - we are responsible for the aftereffect of our work. Now, more than 10 million units of products have been shipped, and this number is amounting every day. We are glad that clients choose FAMAGA again and again, and we are pleased to make more developed and technologically developed industrial equipment so as not to lower the bar.
To request or make a request, get in touch with us or write to the online chat on our site. You can also send a list of the required equipment to the email of corporation - we will contact you ourselves with a made commercial proposal from FAMAGA.
Standards | NFE 49004 |
Compressed air connection | Internal thread |
Ambient temperature min./max. | -20 ... 80 °C |
Medium temperature min./max. | -20 ... 80 °C |
Medium | Compressed air |
Max. particle size | 50 µm |
Oil content of compressed air | 0 ... 5 mg/m³ |
Pressure for determining piston forces | 6.3 bar |
The pressure dew point must be at least 15 °C under ambient and medium temperature and may not exceed 3 °C . The oil content of compressed air must remain constant during the life cycle. Use only the approved oils from AVENTICS. Further information can be found in the “Technical information” document (available in the MediaCentre). |
Use our Internet configurator to order variants with an external thread. |
Material |
---|
Cylinder tube | Aluminum, anodized |
Piston rod | Stainless steel |
Front cover | Aluminum |
End cover | Aluminum |
Seal | Nitrile butadiene rubber Polyurethane |
Scraper | Polyurethane |