We are not the manufacturer, authorised distributor or authorised representative of the Aventics (brand of Emerson) brand Worldwide. The private labels and part numbers shown on this website are the property of their respective owners.
Manufacturer
Aventics (brand of Emerson)
Country
Germany
Part number
R480176813
Description
Functional principle | double-acting |
Cushioning | pneumatically,pneumatically |
adjustable | |
Magnetic piston | with magnetic piston |
Piston diameter | 32 mm |
Piston rod thread | 7/16-20 UNF |
Stroke | 152.4 mm |
Sealing material | Polyurethane |
Scraper | Polyurethane |
Compressed air connection | 1/8 NPT |
Compressed air connection type | Internal thread |
Stock availability:
On request
If you are pursuing Aventics (brand of Emerson) R480176813, communicate with FAMAGA, the world's main vendor of manufacturing equipment. Our company has lasted for more than ten years - these are years of experience, which are depicted in the quality of products and particular attention to each purchaser. We cherish everyone, who joined with us - therefore, our regular consumers obtain the most beneficial purchase terms and discounts on the industrial equipment market. Today, there are more than 4000 such clients, and we constantly make new agreements. More than 650 proceedings are resolved per day, because FAMAGA supplies all over the planet Germany, United Kingdom, Argentina, Lithuania, Peru, Cape Verde, Slovenia, Denmark, Mauritania, Thailand, Comoros, Tonga, Moldova, Ireland, Croatia, Egypt, Georgia, Zambia, Djibouti, Syria, Netherlands, Brunei, South Sudan, Gambia, Kyrgyzstan, Switzerland, United Arab Emirates, Niger, Estonia, Afghanistan, Zimbabwe, Latvia, Bangladesh, Belarus, Russia, Sweden, Jamaica, Mexico, Poland, Central African Republic, Benin, Serbia, Guatemala, Sudan. A advanced logistics network and a partnership network guide us to conduct our goods anywhere in the planet on-time without disreputing product quality.
A special source of dignity for FAMAGA is its workers, each of whom contributes to our work. We call into our team only specialists, who already have experience in the direction of manufacturing equipment.
All spare parts from FAMAGA are verified - we are responsible for the aftereffect of our work. Now, more than 10 million units of products have been shipped, and this number is amounting every day. We are proud that clients choose FAMAGA again and again, and we are happy to make more advanced and technologically modern industrial equipment so as keep on top of it.
To get some advice or place an order, call us by phone or send a message to the online chat on our official website. You can also forward a list of the necessary equipment to the email of our company - we will contact you ourselves with a prepared commercial proposal from FAMAGA.
Compressed air connection | Internal thread |
Working pressure min./max. | 2 ... 10 bar |
Ambient temperature min./max. | -20 ... 80 °C |
Medium temperature min./max. | -20 ... 80 °C |
Medium | Compressed air |
Max. particle size | 50 µm |
Oil content of compressed air | 0 ... 5 mg/m³ |
Pressure for determining piston forces | 6.3 bar |
The pressure dew point must be at least 15 °C under ambient and medium temperature and may not exceed 3 °C . The oil content of compressed air must remain constant during the life cycle. Use only the approved oils from AVENTICS. Further information can be found in the “Technical information” document (available in the MediaCentre). |
Material |
---|
Cylinder tube | Aluminum, anodized |
Piston rod | Stainless steel |
Front cover | Die-cast aluminum |
End cover | Die-cast aluminum |
Seal | Polyurethane |
Nut for piston rod | Steel, galvanized |
Scraper | Polyurethane |
Tie-rods | Stainless steel Steel, galvanized |
See table for additional data on materials. |