We are not the manufacturer, authorised distributor or authorised representative of the Aventics (brand of Emerson) brand Worldwide. The private labels and part numbers shown on this website are the property of their respective owners.
Manufacturer
Aventics (brand of Emerson)
Country
Germany
Part number
R412000394
Description
Adjustable angle of rotation max. | 180 ° |
Adjustable angle of rotation min. | 0 ° |
Frame size | RCM-25 |
Version | double piston with rack |
Cushioning | hydraulic |
non-adjustable | |
Magnetic piston | with magnetic piston |
Piston diameter | 25 mm |
Housing | Aluminum |
Sealing material | Acrylonitrile butadiene rubber |
Compressed air connection | M5 |
Stock availability:
On request
If you are questing Aventics (brand of Emerson) R412000394, get in touch with FAMAGA, the world's main distributor of machine made equipment. Our company has lasted for more than ten years - these are cycles of experience, which are expressed in the quality of goods and particular attention to each purchaser. We value everyone, who joined with us - hence, our regular purchasers procure the most desirable purchase forms and discounts on the manufacturing equipment market. Now, there are more than 4000 such customers, and we constantly arrange new agreements. More than 650 transactions are made per day, because FAMAGA delivers all over the earth Germany, United Kingdom, Belarus, Ireland, Namibia, Zambia, Grenada, Togo, Czech Republic, Dominica, Bulgaria, Switzerland, Burkina Faso, Israel, Tanzania, Kyrgyzstan, Andorra, United States, Mongolia, Sierra Leone, Liechtenstein, New Zealand, Tunisia, Latvia, Armenia, Kiribati, Poland, Lithuania, Turkey, Russia, Thailand, Tajikistan, Libya, Cameroon, Algeria, Denmark, Senegal, Kazakhstan, Haiti, Chile, Mali, Rwanda, Antigua and Barbuda. A well-built logistics connection and a partnership network cheer us to ship our goods anywhere in the globe promptly without damaging product quality.
A specific source of honor for FAMAGA is its employees, each of whom contributes to our work. We invite into our team only professionals, who already have experience in the range of machine made streamlined equipment.
All outputs from FAMAGA are assured - we are responsible for the aftereffect of our work. Nowadays, more than 10 million units of products have been shipped, and this bulk is amounting every day. We are glad that buyers choose FAMAGA again and again, and we are eager to make more progressive and technologically modern industrial equipment so as not to lower the bar.
To get some advice or book, get in touch with us or send a message to the online chat on our official website. You can also forward a list of the desirable equipment to the email of our company - we will contact you ourselves with a prepared commercial proposal from FAMAGA.
Working pressure min./max. | See table |
Ambient temperature min./max. | 5 ... 60 °C |
Medium temperature min./max. | 5 ... 60 °C |
Medium | Compressed air |
Max. particle size | 5 µm |
Oil content of compressed air | 0 ... 1 mg/m³ |
air duct | with air duct |
Cushioning | hydraulic non-adjustable |
Theoretical torque at | 6 bar |
Weight | See table |
The pressure dew point must be at least 15 °C under ambient and medium temperature and may not exceed 3 °C . The oil content of compressed air must remain constant during the life cycle. Use only the approved oils from AVENTICS. Further information can be found in the “Technical information” document (available in the MediaCentre). |
Material |
---|
Housing | Aluminum, anodized |
Cap | Aluminum, black anodized |
Base | Aluminum, black anodized |
Seal | Acrylonitrile butadiene rubber |
Axis | Steel, hardened |
Rotary flange | Steel, hardened |