We are not the manufacturer, authorised distributor or authorised representative of the Aventics (brand of Emerson) brand Worldwide. The private labels and part numbers shown on this website are the property of their respective owners.
Manufacturer
Aventics (brand of Emerson)
Country
Germany
Part number
R412020673
Description
Functional principle | double-acting |
Cushioning | elastic |
non-adjustable | |
Magnetic piston | with magnetic piston |
Piston diameter | 63 mm |
Piston rod thread | M16x1,5 |
Stroke | 25 mm |
Sealing material | Polyurethane |
Scraper | Polyurethane |
Compressed air connection | G 3/8 |
Compressed air connection type | Internal thread |
Stock availability:
On request
If you are looking for Aventics (brand of Emerson) R412020673, reach FAMAGA, the world's main producer of industrialized equipment. Our company has advanced for more than ten years - these are cycles of experience, which are depicted in the quality of spare parts and particular attention to each orderer. We cherish everyone, who worked with us - thus, our regular consumers accept the most convenient purchase conditions and discounts on the industrial equipment market. Now, there are more than 4500 such buyers, and we constantly make new agreements. More than 700 agreements are achieved per day, because FAMAGA operates all over the globe Germany, United Kingdom, Palestine, Honduras, Turkey, Ghana, Mexico, Poland, The Gambia, Argentina, Suriname, Canada, Haiti, Mali, Thailand, Kuwait, Samoa, Morocco, Peru, Kazakhstan, Burkina Faso, Belize, Panama, Chad, China, Sudan, Egypt, Ireland, Australia, Mozambique, Tajikistan, Philippines, Norway, Nicaragua, Cyprus, Sweden, Cape Verde, Andorra, Albania, Zimbabwe, East Timor, United Arab Emirates, Yemen, Comoros, Nepal, Djibouti. A well-shaped logistics network and a partnership network cheer us to send our goods anywhere in the globe immediately without undermining product quality.
A special source of repute for FAMAGA is its personnel, each of whom contributes to common cause. We invite into our team only professionals, who already have experience in the range of manufacturing equipment.
All products from FAMAGA are verified - we are responsible for the outcome of our work. At this moment, more than 10 million units of products have been provided, and this bulk is ascending every day. We are pleased that clients choose FAMAGA again and again, and we are pleased to make more exceptional and technologically developed industrial equipment so as keep on top of it.
To get some advice or book, contact us or write to the online chat on our site. You can also send a list of the desirable equipment to the email of our company - we will contact you ourselves with a made commercial proposal from FAMAGA.
Compressed air connection | Internal thread |
Working pressure min./max. | 1 ... 10 bar |
Ambient temperature min./max. | -20 ... 80 °C |
Medium temperature min./max. | -20 ... 80 °C |
Medium | Compressed air |
Max. particle size | 50 µm |
Oil content of compressed air | 0 ... 5 mg/m³ |
Pressure for determining piston forces | 6.3 bar |
The pressure dew point must be at least 15 °C under ambient and medium temperature and may not exceed 3 °C . The oil content of compressed air must remain constant during the life cycle. Use only the approved oils from AVENTICS. Further information can be found in the “Technical information” document (available in the MediaCentre). |
Clamping piece for magnetic field sensor necessary |
Use our Internet configurator to order these variants with coarse-pitch thread M10x1.5 or M12x1.75. |
Material |
---|
Cylinder tube | Stainless steel |
Piston rod | Stainless steel |
Piston | Aluminum |
Front cover | Aluminum, anodized |
End cover | Aluminum, anodized |
Seal | Polyurethane |
Nut for piston rod | Steel, galvanized |
Scraper | Polyurethane |
Guide bushing | Steel |