We are not the manufacturer, authorised distributor or authorised representative of the Aventics (brand of Emerson) brand Worldwide. The private labels and part numbers shown on this website are the property of their respective owners.
Manufacturer
Aventics (brand of Emerson)
Country
Germany
Part number
R480651400
Description
Functional principle | double-acting |
Cushioning | pneumatically |
non-adjustable | |
Magnetic piston | with magnetic piston |
Piston diameter | 16 mm |
Piston rod thread | M6 |
Standardization | ISO 6432 |
Stroke | 50 mm |
Sealing material | Nitrile butadiene rubber |
Scraper | Thermoplastic polyurethane (TPU) |
ATEX optional | |
Compressed air connection | M5 |
Compressed air connection type | Internal thread |
Stock availability:
On request
If you are seeking Aventics (brand of Emerson) R480651400, connect FAMAGA, the world's central distributor of industrialized equipment. Our company has existed for more than ten years - these are ages of experience, which are illustrated in the quality of products and special attention to each client. We esteem everyone, who liased with us - therefore, our regular buyers get the most favorable purchase terms and discounts on the factory-made equipment market. Nowadays, there are more than 3500 such customers, and we constantly sign new agreements. More than 700 proceedings are resolved per day, because FAMAGA operates all over the planet Germany, United Kingdom, Cameroon, Malawi, Papua New Guinea, Dominican Republic, Lesotho, Oman, Haiti, Finland, Australia, Thailand, Japan, Netherlands, Liberia, The Bahamas, Yemen, Nicaragua, Turkmenistan, Madagascar, Romania, Mauritius, Mongolia, Egypt, Kenya, Seychelles, El Salvador, Dominica, Ecuador, Suriname, Georgia, Zimbabwe, Ukraine, Jamaica, Botswana, Togo, Hungary, Cape Verde, Guatemala, Malaysia, Eswatini, Comoros, Brazil, Indonesia, Nigeria, Djibouti, Mauritania, Qatar, Jordan, Vietnam, Mozambique. A well-built logistics link and a partnership network let us to send our units anywhere in the world on-time without damaging product quality.
A particular source of repute for FAMAGA is its employees, each of whom contributes to our work. We propose into our team only experts, who already have experience in the field of manufacturing equipment.
All outputs from FAMAGA are affirmed - we are responsible for the outcome of our work. At the moment, more than 10 million units of products have been supplied, and this number is rising every day. We are happy that clients choose FAMAGA again and again, and we are glad to make more advanced and technologically developed industrial equipment so as stay in control.
To consult or place an order, phone us or write a message to the online chat on our official website. You can also send a list of the required equipment to the email of corporation - we will contact you ourselves with a ready-made commercial proposal from FAMAGA.
Standards | ISO 6432 |
Certificates | ATEX optional |
Compressed air connection | Internal thread |
Working pressure min./max. | 1 ... 10 bar |
Ambient temperature min./max. | -20 ... 80 °C |
Medium temperature min./max. | -20 ... 80 °C |
Medium | Compressed air |
Max. particle size | 50 µm |
Oil content of compressed air | 0 ... 5 mg/m³ |
Pressure for determining piston forces | 6.3 bar |
The pressure dew point must be at least 15 °C under ambient and medium temperature and may not exceed 3 °C . The oil content of compressed air must remain constant during the life cycle. Use only the approved oils from AVENTICS. Further information can be found in the “Technical information” document (available in the MediaCentre). |
Clamping piece for magnetic field sensor necessary |
ATEX-certified cylinders with identification II 2G Ex h IIB T4 Gb / II 2D Ex h IIIB T135°C Db_X can be generated in the Internet configurator. The operating temperature range for ATEX-certified cylinders is -20 °C ... 50 °C. |
Material |
---|
Cylinder tube | Stainless steel, ground |
Piston rod | Stainless steel, ground |
Piston | Aluminum |
Front cover | Stainless steel, Electropolished |
End cover | Stainless steel, Electropolished |
Seal | Nitrile butadiene rubber |
Nut for cylinder mounting | Stainless steel, ground |
Nut for piston rod | Stainless steel, ground |
Scraper | Thermoplastic polyurethane (TPU) |
Guide bushing | Steel |