We are not the manufacturer, authorised distributor or authorised representative of the Aventics (brand of Emerson) brand Worldwide. The private labels and part numbers shown on this website are the property of their respective owners.
Manufacturer
Aventics (brand of Emerson)
Country
Germany
Part number
R412007211
Description
Parts | Filter pressure regulator |
Condensate drain | fully automatic, closed without pressure |
Relieving exhaust | with relieving air exhaust |
filter porosity | 5 µm |
Pressure gauge | with pressure gauge |
lockable | lockable |
Housing | Polyamide |
Reservoir | Polycarbonate |
Sealing material | Acrylonitrile butadiene rubber |
suitable for ATEX | |
Nominal flow Qn | 5100 l/min |
Compressed air connection | G 1/2 |
Stock availability:
On request
If you are pursuing Aventics (brand of Emerson) R412007211, reach FAMAGA, the world's central provider of mechanized equipment. Our company has worked for more than ten years - these are ages of experience, which are described in the quality of merchandises and individual attention to each client. We admire everyone, who collaborated with us - so, our regular purchasers receive the most desirable purchase forms and discounts on the machine made streamlined equipment market. Now, there are more than 4500 such purchasers, and we constantly arrange new agreements. More than 650 contracts are concluded per day, because FAMAGA delivers all over the world Germany, United Kingdom, South Korea, Serbia, Eswatini, Lesotho, Cyprus, Armenia, Croatia, Bangladesh, Antigua and Barbuda, Belgium, Zambia, Liechtenstein, Finland, Greece, Angola, Namibia, Botswana, Iceland, Sweden, Malawi, Indonesia, Azerbaijan, Gambia, Niger, Ukraine, Ireland, Hungary, Laos, Brunei, Israel, Algeria, Senegal, Belize, Iran, Fiji, Czech Republic, Afghanistan, Tonga, Ecuador, Kenya, Morocco, Turkey, Georgia, Libya, Mauritania, Ghana, Panama. A advanced logistics system and a partnership network help us to ship our products anywhere in the world with no delay without compromising product quality.
A particular source of good name for FAMAGA is its team members, each of whom contributes to common cause. We call into our team only specialists, who already have experience in the field of machine made streamlined equipment.
All spare parts from FAMAGA are affirmed - we are responsible for the cause of our work. At this moment, more than 10 million units of products have been provided, and this number is amounting every day. We are proud that buyers choose FAMAGA again and again, and we strive to make more advanced and technologically modern industrial equipment so as keep on top of it.
To get some advice or place an order, phone us or write a message to the online chat on our site. You can also dispatch a list of the required equipment to the email of corporation - we will contact you ourselves with a made commercial proposal from FAMAGA.
Version | 1-part, Can be assembled into blocks |
Parts | Filter pressure regulator |
Mounting orientation | vertical |
Certificates | suitable for ATEX |
Working pressure min./max. | 1,5 ... 16 bar |
Ambient temperature min./max. | -10 ... 50 °C |
Medium temperature min./max. | -10 ... 50 °C |
Medium | Compressed air Neutral gases |
Nominal flow Qn | 5100 l/min |
Regulator type | Diaphragm-type pressure regulator |
Regulator function | with relieving air exhaust |
Adjustment range min./max. | See table |
Pressure supply | single |
Filter reservoir volume | 49 cm³ |
Filter element | exchangeable |
Weight | See table |
The pressure dew point must be at least 15 °C under ambient and medium temperature and may not exceed 3 °C . Note: Polycarbonate reservoirs are susceptible to solvents, supplementary information can be found at "Customer information". Suitable for use in Ex zones 1, 2, 21, 22. A change in the flow direction (from air supply on the left to air supply on the right) occurs by rotating installation by 180° about the vertical axis. Please see the operating instructions for further details. Also suitable for separation of fluid oil or water due to the design. | |
Max. achievable compressed air class acc. to ISO 8573-1:2010 | 6 : 7 : - |
Material |
---|
Housing | Polyamide |
Front plate | Acrylonitrile butadiene styrene |
Seals | Acrylonitrile butadiene rubber |
Threaded bushing | Die cast zinc |
Reservoir | Polycarbonate Die cast zinc |
Protective guard | Polyamide |
Filter insert | Polyethylene |