We are not the manufacturer, authorised distributor or authorised representative of the Aventics (brand of Emerson) brand Worldwide. The private labels and part numbers shown on this website are the property of their respective owners.
Manufacturer
Aventics (brand of Emerson)
Country
Germany
Part number
0822496203
Description
Piston rod modification | Optionally through (hollow) |
Functional principle | Single-acting, retracted without pressure |
Cushioning | elastic |
Magnetic piston | with magnetic piston |
Piston diameter | 63 mm |
Piston rod thread | M12x1,25 |
Standardization | NFE 49004 |
Stroke | 20 mm |
Sealing material | Polyurethane |
Scraper | Polyurethane |
Compressed air connection | G 1/8 |
Compressed air connection type | Internal thread |
Temperature resistance | Optionally heat-resistant |
Stock availability:
On request
If you are looking for Aventics (brand of Emerson) 0822496203, call FAMAGA, the world's influential supplier of machine made equipment. Our company has advanced for more than ten years - these are years of experience, which are expressed in the quality of goods and particular attention to each purchaser. We understand everyone, who joined with us - thus, our regular consumers procure the most desirable purchase terms and discounts on the industrial equipment market. Today, there are more than 4500 such clients, and we constantly make new agreements. More than 650 transactions are made per day, because FAMAGA works all over the world Germany, United Kingdom, Malta, Andorra, Chad, Honduras, Uzbekistan, Slovenia, Palestine, Liberia, France, Bosnia and Herzegovina, China, The Gambia, Bangladesh, Cameroon, North Korea, Zimbabwe, Jamaica, Azerbaijan, Thailand, Brazil, Sudan, Uruguay, Pakistan, Armenia, Finland, Norway, Mali, Nepal, Czech Republic, Algeria, East Timor, Slovakia, Rwanda, Antigua and Barbuda, Equatorial Guinea, Turkey, Montenegro, Burundi, Kyrgyzstan, Niger, Kazakhstan, Denmark. A well-elaborated logistics connection and a partnership network let us to dispatch our goods anywhere in the globe with no delay without disreputing product quality.
A specific source of good name for FAMAGA is its workers, each of whom contributes to our work. We request into our team only professionals, who already have experience in the sphere of industrial equipment.
All products from FAMAGA are ensured - we are responsible for the cause of our work. At the moment, more than 10 million units of products have been shipped, and this bulk is amounting every day. We are proud that consumers choose FAMAGA again and again, and we are pleased to make more exceptional and technologically developed industrial equipment so as not to lower the bar.
To request or order, call us by phone or send a message to the online chat on our site. You can also dispatch a list of the required equipment to the email of our company - we will contact you ourselves with a prepared commercial proposal from FAMAGA.
Standards | NFE 49004 |
Compressed air connection | Internal thread |
Ambient temperature min./max. | -20 ... 80 °C |
Medium temperature min./max. | -20 ... 80 °C |
Medium | Compressed air |
Max. particle size | 50 µm |
Oil content of compressed air | 0 ... 5 mg/m³ |
Pressure for determining piston forces | 6.3 bar |
The pressure dew point must be at least 15 °C under ambient and medium temperature and may not exceed 3 °C . The oil content of compressed air must remain constant during the life cycle. Use only the approved oils from AVENTICS. Further information can be found in the “Technical information” document (available in the MediaCentre). |
The material for heat-resistant scraper and seal variants (ambient temperature: -10 °C ... 120 °C) is fluorocaoutchouc. Further options can be generated in the Internet configurator. LW*/SW* Hexagonal key required |
Material |
---|
Cylinder tube | Aluminum, anodized |
Piston rod | Stainless steel |
Front cover | Aluminum |
End cover | Aluminum |
Seal | Nitrile butadiene rubber Polyurethane |
Nut for piston rod | Steel, galvanized |
Scraper | Polyurethane |