We are not the manufacturer, authorised distributor or authorised representative of the Aventics (brand of Emerson) brand Worldwide. The private labels and part numbers shown on this website are the property of their respective owners.
Manufacturer
Aventics (brand of Emerson)
Country
Germany
Part number
R480147962
Description
Functional principle | double-acting |
Cushioning | pneumatically |
adjustable | |
Piston diameter | 32 mm |
Piston rod thread | M10x1,25 |
Standardization | ISO 15552 |
Stroke | 160 mm |
Sealing material | Fluorocaoutchouc |
Scraper | Fluorocaoutchouc |
Compressed air connection | G 1/8 |
Compressed air connection type | Internal thread |
Temperature resistance | Heat resistant |
Stock availability:
On request
If you are pursuing Aventics (brand of Emerson) R480147962, get in touch with FAMAGA, the world's leading vendor of manufacturing equipment. Our company has advanced for more than ten years - these are years of experience, which are expressed in the quality of merchandises and particular attention to each consumer. We respect everyone, who cooperated with us - so, our regular purchasers bring in the most attractive purchase terms and discounts on the industrial equipment market. Today, there are more than 4000 such purchasers, and we constantly make new agreements. More than 600 purchases are terminated per day, because FAMAGA operates all over the planet Germany, United Kingdom, Cyprus, Vietnam, Guyana, Grenada, South Sudan, Guinea, Nicaragua, Colombia, Papua New Guinea, Iceland, Myanmar, Malta, Haiti, Qatar, Panama, Canada, Tonga, Angola, Suriname, Belarus, Zimbabwe, East Timor, Moldova, Peru, Namibia, Djibouti, Ireland, Central African Republic, Afghanistan, Turkmenistan, Iraq, South Korea, Comoros, Croatia, Tajikistan, Morocco, Swaziland, Jamaica, Mexico, Burkina Faso, Brunei, Switzerland. A advanced logistics link and a partnership network guide us to conduct our items anywhere in the globe immediately without damaging product quality.
A special source of dignity for FAMAGA is its workers, each of whom contributes to our work. We call into our team only specialists, who already have experience in the range of factory-made equipment.
All spare parts from FAMAGA are affirmed - we are responsible for the outcome of our work. Now, more than 10 million units of products have been shipped, and this number is amounting every day. We are proud that consumers choose FAMAGA again and again, and we are happy to make more developed and technologically advanced industrial equipment so as not to lower the bar.
To get some advice or place an order, call us by phone or send a message to the online chat on our official website. You can also dispatch a list of the desirable equipment to the email of firm - we will contact you ourselves with a made commercial proposal from FAMAGA.
Standards | ISO 15552 |
Compressed air connection | Internal thread |
Working pressure min./max. | 2 ... 10 bar |
Ambient temperature min./max. | -10 ... 150 °C |
Medium temperature min./max. | -10 ... 150 °C |
Medium | Compressed air |
Max. particle size | 50 µm |
Oil content of compressed air | 0 ... 5 mg/m³ |
Pressure for determining piston forces | 6.3 bar |
The pressure dew point must be at least 15 °C under ambient and medium temperature and may not exceed 3 °C . The oil content of compressed air must remain constant during the life cycle. Use only the approved oils from AVENTICS. Further information can be found in the “Technical information” document (available in the MediaCentre). |
Material |
---|
Cylinder tube | Aluminum, anodized |
Piston rod | Stainless steel |
Front cover | Die-cast aluminum |
End cover | Die-cast aluminum |
Seal | Fluorocaoutchouc |
Nut for piston rod | Steel, galvanized |
Scraper | Fluorocaoutchouc |