We are not the manufacturer, authorised distributor or authorised representative of the Aventics (brand of Emerson) brand Worldwide. The private labels and part numbers shown on this website are the property of their respective owners.
Manufacturer
Aventics (brand of Emerson)
Country
Germany
Part number
0821300304
Description
Parts | Filter pressure regulator |
Condensate drain | fully automatic, open without pressure |
Relieving exhaust | with relieving air exhaust |
filter porosity | 5 µm |
Pressure gauge | with pressure gauge |
Housing | Die cast zinc |
Reservoir | Polycarbonate |
Sealing material | Acrylonitrile butadiene rubber |
suitable for ATEX | |
Nominal flow Qn | 1650 l/min |
Compressed air connection | G 1/4 |
Stock availability:
On request
If you are inspecting Aventics (brand of Emerson) 0821300304, contact FAMAGA, the world's primary distributor of factory-made equipment. Our company has functioned for more than ten years - these are years of experience, which are expressed in the quality of products and special attention to each consumer. We praise everyone, who worked with us - therefore, our regular buyers accept the most beneficial purchase conditions and discounts on the industrial equipment market. At this time, there are more than 4500 such buyers, and we constantly compose new agreements. More than 700 transactions are made per day, because FAMAGA operates all over the earth Germany, United Kingdom, Venezuela, Azerbaijan, The Gambia, Slovenia, The Bahamas, Guinea, South Sudan, Bhutan, Colombia, Eritrea, Bangladesh, Botswana, Finland, Moldova, Eswatini, Mozambique, El Salvador, Switzerland, Samoa, Netherlands, North Korea, Fiji, Albania, Paraguay, Guatemala, Sweden, Uganda, Mauritania, Seychelles, Malaysia, Burundi, Cape Verde, Costa Rica, Mauritius, Togo, Dominica, Nepal, Georgia, Egypt. A well-elaborated logistics bond and a partnership network allow us to send our units anywhere in the earth with no delay without undermining product quality.
A special source of honor for FAMAGA is its team members, each of whom contributes to common cause. We invite into our team only experts, who already have experience in the range of industrial equipment.
All merchandises from FAMAGA are assured - we are responsible for the aftereffect of our work. Now, more than 10 million units of products have been supplied, and this number is ascending every day. We are glad that buyers choose FAMAGA again and again, and we are pleased to make more exceptional and technologically developed industrial equipment so as not to lower the bar.
To ask a question or make a request, phone us or write to the online chat on our official website. You can also send a list of the needful equipment to the email of organization - we will contact you ourselves with a worked out commercial proposal from FAMAGA.
Version | 1-part, Can be assembled into blocks |
Parts | Filter pressure regulator |
Mounting orientation | vertical |
Certificates | suitable for ATEX |
Working pressure min./max. | 2 ... 16 bar |
Ambient temperature min./max. | -10 ... 60 °C |
Medium temperature min./max. | -10 ... 60 °C |
Medium | Compressed air Neutral gases |
Nominal flow Qn | 1650 l/min |
Regulator type | Diaphragm-type pressure regulator |
Regulator function | with relieving air exhaust |
Adjustment range min./max. | See table |
Pressure supply | single |
Filter reservoir volume | 25 cm³ |
Filter element | exchangeable |
Weight | See table |
The pressure dew point must be at least 15 °C under ambient and medium temperature and may not exceed 3 °C . Suitable for use in Ex zones 1, 2, 21, 22. Note: Polycarbonate reservoirs are susceptible to solvents, supplementary information can be found at "Customer information". A change in the flow direction (from air supply on the left to air supply on the right) occurs by rotating installation by 180° about the vertical axis. Please see the operating instructions for further details. Also suitable for separation of fluid oil or water due to the design. The rear pressure gauge connection on the pressure regulator is closed with a blanking plug, the front connection is open. Depending on the customer application, a second blanking plug may be necessary. Please order separately (see accessories). | |
Max. achievable compressed air class acc. to ISO 8573-1:2010 | 6 : 7 : - |
Material |
---|
Housing | Die cast zinc |
Front plate | Acrylonitrile butadiene styrene |
Seals | Acrylonitrile butadiene rubber |
Reservoir | Polycarbonate Die cast zinc |
Protective guard | Steel |
Filter insert | Polyethylene |