We are not the manufacturer, authorised distributor or authorised representative of the Aventics (brand of Emerson) brand Worldwide. The private labels and part numbers shown on this website are the property of their respective owners.
Manufacturer
Aventics (brand of Emerson)
Country
Germany
Part number
R480147960
Description
Functional principle | double-acting |
Cushioning | pneumatically |
adjustable | |
Piston diameter | 32 mm |
Piston rod thread | M10x1,25 |
Standardization | ISO 15552 |
Stroke | 100 mm |
Sealing material | Fluorocaoutchouc |
Scraper | Fluorocaoutchouc |
Compressed air connection | G 1/8 |
Compressed air connection type | Internal thread |
Temperature resistance | Heat resistant |
Stock availability:
On request
If you are inspecting Aventics (brand of Emerson) R480147960, contact FAMAGA, the world's primary producer of mechanized equipment. Our company has functioned for more than ten years - these are years of experience, which are described in the quality of merchandises and special attention to each buyer. We admire everyone, who worked with us - thus, our regular clients procure the most desirable purchase conditions and discounts on the machine made streamlined equipment market. Today, there are more than 4500 such customers, and we constantly make new agreements. More than 750 transactions are made per day, because FAMAGA delivers all over the world Germany, United Kingdom, Luxembourg, Lithuania, Kiribati, Iceland, Panama, North Korea, Norway, Iran, Senegal, Suriname, Mauritania, Guinea, Sierra Leone, Laos, Israel, Turkey, Kenya, Jordan, Malta, United States, Nigeria, Bulgaria, Turkmenistan, Central African Republic, Cyprus, Tanzania, Bangladesh, Bosnia and Herzegovina, Moldova, Albania, Paraguay, Cape Verde, India, Kyrgyzstan, Macedonia, Vietnam, Greece, Uganda. A well-elaborated logistics chains and a partnership network help us to deliver our units anywhere in the earth as soon as possible without disreputing product quality.
A special source of honor for FAMAGA is its workers, each of whom contributes to common cause. We accept into our team only experts, who already have experience in the direction of factory-made equipment.
All outcomes from FAMAGA are guaranteed - we are responsible for the cause of our work. At the moment, more than 10 million units of products have been provided, and this amount is ascending every day. We are glad that customers choose FAMAGA again and again, and we are happy to make more advanced and technologically modern industrial equipment so as not to lower the bar.
To get some advice or order, contact us or write a message to the online chat on our official website. You can also dispatch a list of the required equipment to the email of corporation - we will contact you ourselves with a ready-made commercial proposal from FAMAGA.
Standards | ISO 15552 |
Compressed air connection | Internal thread |
Working pressure min./max. | 2 ... 10 bar |
Ambient temperature min./max. | -10 ... 150 °C |
Medium temperature min./max. | -10 ... 150 °C |
Medium | Compressed air |
Max. particle size | 50 µm |
Oil content of compressed air | 0 ... 5 mg/m³ |
Pressure for determining piston forces | 6.3 bar |
The pressure dew point must be at least 15 °C under ambient and medium temperature and may not exceed 3 °C . The oil content of compressed air must remain constant during the life cycle. Use only the approved oils from AVENTICS. Further information can be found in the “Technical information” document (available in the MediaCentre). |
Material |
---|
Cylinder tube | Aluminum, anodized |
Piston rod | Stainless steel |
Front cover | Die-cast aluminum |
End cover | Die-cast aluminum |
Seal | Fluorocaoutchouc |
Nut for piston rod | Steel, galvanized |
Scraper | Fluorocaoutchouc |