We are not the manufacturer, authorised distributor or authorised representative of the Aventics (brand of Emerson) brand Worldwide. The private labels and part numbers shown on this website are the property of their respective owners.
Manufacturer
Aventics (brand of Emerson)
Country
Germany
Part number
0820024300
Description
Standardization | ISO 5599-1 |
Frame size | ISO 1 |
Actuating control | single solenoid |
Return type | With spring return |
Switching principle | 5/2 |
Version | Spool valve, positive overlapping |
Housing | Polyamide |
Sealing material | Acrylonitrile butadiene rubber |
Protection class | IP65 |
Number of wires | 3-pin |
Port size | M12 |
Type | Plug |
Nominal flow Qn | 1060 l/min |
Compressed air connection input | Base plate ISO 5599-1 |
Compressed air connection output | Base plate ISO 5599-1 |
DC operating voltage | 24 V |
Stock availability:
On request
If you are questing Aventics (brand of Emerson) 0820024300, communicate with FAMAGA, the world's the best company of mechanized equipment. Our company has advanced for more than ten years - these are ages of experience, which are expressed in the quality of goods and special attention to each customer. We cherish everyone, who collaborated with us - thus, our regular buyers bring in the most helpful purchase forms and discounts on the machine made streamlined equipment market. At this moment, there are more than 4000 such consumers, and we constantly arrange new agreements. More than 700 transactions are made per day, because FAMAGA operates all over the earth Germany, United Kingdom, Chile, Mozambique, Ireland, Romania, Belarus, Zambia, Luxembourg, Pakistan, Bhutan, Papua New Guinea, Zimbabwe, Oman, Netherlands, Senegal, South Sudan, Ecuador, The Bahamas, South Korea, Kuwait, Tajikistan, Botswana, Togo, Estonia, Kazakhstan, Mauritania, Haiti, El Salvador, Laos, Cyprus, Samoa, Jamaica, Eswatini, Latvia, Rwanda, Dominica, Niger, Guatemala, Morocco, United States, Greece, Seychelles, Andorra. A well-shaped logistics network and a partnership network allow us to dispatch our products anywhere in the world as soon as possible without discrediting product quality.
A special source of dignity for FAMAGA is its personnel, each of whom contributes to our work. We invite into our team only professionals, who already have experience in the direction of industrial equipment.
All outcomes from FAMAGA are assured - we are responsible for the outcome of our work. At this moment, more than 10 million units of products have been shipped, and this bulk is rising every day. We are proud that buyers choose FAMAGA again and again, and we are glad to make more exceptional and technologically modern industrial equipment so as not to lower the bar.
To get some advice or place an order, contact us or write to the online chat on our official website. You can also forward a list of the required equipment to the email of corporation - we will contact you ourselves with a prepared commercial proposal from FAMAGA.
Version | Spool valve, positive overlapping |
Sealing principle | Soft sealing |
Blocking principle | Single base plate principle |
Connection type | Plate connection |
Standards | ISO 5599-1, ISO 1 |
Working pressure min./max. | See table |
Control pressure min./max. | See table |
Ambient temperature min./max. | -10 ... 50 °C |
Medium temperature min./max. | -10 ... 60 °C |
Medium | Compressed air |
Max. particle size | 5 µm |
Oil content of compressed air | 0 ... 5 mg/m³ |
Nominal flow Qn | 1060 l/min |
Protection class with connection | IP65 |
LED status display | Yellow |
Nominal resistance | 1480 Ω |
Duty cycle | 100 % |
Typ. switch-on time | See table |
Typ. switch-off time | See table |
Mounting screw | M5 with hexagon socket |
Mounting screw tightening torque | 2,2 Nm |
Weight | See table |
The min. control pressure must be adhered to, since otherwise faulty switching and valve failure may result! The pressure dew point must be at least 15 °C under ambient and medium temperature and may not exceed 3 °C . The oil content of compressed air must remain constant during the life cycle. Use only the approved oils from AVENTICS. Further information can be found in the “Technical information” document (available in the MediaCentre). |
Housing | Polyamide |
Seals | Acrylonitrile butadiene rubber |
Front plate | Polyamide |