We are not the manufacturer, authorised distributor or authorised representative of the Aventics (brand of Emerson) brand Worldwide. The private labels and part numbers shown on this website are the property of their respective owners.
Manufacturer
Aventics (brand of Emerson)
Country
Germany
Part number
R480637972
Description
Piston rod modification | non-rotating, with front plate |
Functional principle | double-acting |
Cushioning | elastic |
Magnetic piston | with magnetic piston |
Piston diameter | 50 mm |
Standardization | ISO 15524 |
Stroke | 5 mm |
Sealing material | Polyurethane |
Scraper | Polyurethane |
Compressed air connection | G 1/4 |
Compressed air connection type | Internal thread |
Stock availability:
On request
If you are seeking Aventics (brand of Emerson) R480637972, make contact with FAMAGA, the world's chief supplier of industrialized equipment. Our company has worked for more than ten years - these are cycles of experience, which are depicted in the quality of products and individual attention to each orderer. We praise everyone, who liased with us - so, our regular clients get the most flexible purchase terms and discounts on the industrial equipment market. Today, there are more than 4000 such clients, and we constantly compose new agreements. More than 600 purchases are terminated per day, because FAMAGA supplies all over the globe Germany, United Kingdom, Afghanistan, Libya, Austria, United Arab Emirates, Indonesia, Montenegro, Hungary, Bolivia, Sierra Leone, Canada, Kiribati, Serbia, Belize, United States, Niger, Malaysia, Guatemala, Guyana, Cyprus, The Bahamas, Peru, Netherlands, Jordan, Suriname, El Salvador, Tanzania, Georgia, Ireland, Iran, Mexico, Azerbaijan, Morocco, The Gambia, Yemen, Dominica, Albania, India, Ukraine, South Korea, Togo, Norway, Botswana, Mauritius. A well-developed logistics bond and a partnership network guide us to deliver our items anywhere in the earth immediately without undermining product quality.
A particular source of repute for FAMAGA is its employees, each of whom contributes to our work. We propose into our team only specialists, who already have experience in the range of machine made streamlined equipment.
All products from FAMAGA are ensured - we are responsible for the aftereffect of our work. Nowadays, more than 10 million units of products have been shipped, and this number is increasing every day. We are proud that consumers choose FAMAGA again and again, and we are pleased to make more developed and technologically advanced industrial equipment so as keep on top of it.
To request or place an order, call us by phone or send a message to the online chat on our official website. You can also dispatch a list of the needful equipment to the email of firm - we will contact you ourselves with a made commercial proposal from FAMAGA.
Standards | ISO 15524 |
Compressed air connection | Internal thread |
Ambient temperature min./max. | -20 ... 80 °C |
Medium temperature min./max. | -20 ... 80 °C |
Medium | Compressed air |
Max. particle size | 50 µm |
Oil content of compressed air | 0 ... 5 mg/m³ |
Pressure for determining piston forces | 6.3 bar |
The pressure dew point must be at least 15 °C under ambient and medium temperature and may not exceed 3 °C . The oil content of compressed air must remain constant during the life cycle. Use only the approved oils from AVENTICS. Further information can be found in the “Technical information” document (available in the MediaCentre). |
Material |
---|
Cylinder tube | Aluminum, anodized |
Piston rod | Stainless steel |
Front cover | Brass Aluminum |
End cover | Aluminum |
Seal | Nitrile butadiene rubber Polyurethane |
Front plate | Aluminum |
Guide rod | Stainless steel |
Scraper | Nitrile butadiene rubber Polyurethane |
See table for additional data on materials. |