We are not the manufacturer, authorised distributor or authorised representative of the Aventics (brand of Emerson) brand Worldwide. The private labels and part numbers shown on this website are the property of their respective owners.
Manufacturer
Aventics (brand of Emerson)
Country
Germany
Part number
0822340600
Description
Functional principle | double-acting |
Cushioning | elastic |
Magnetic piston | with magnetic piston |
Piston diameter | 32 mm |
Piston rod thread | M10x1,25 |
Standardization | ISO 15552 |
Stroke | 25 mm |
Sealing material | Polyurethane |
Scraper | Polyurethane |
Compressed air connection | G 1/8 |
Compressed air connection type | Internal thread |
Stock availability:
On request
If you are seeking Aventics (brand of Emerson) 0822340600, make contact with FAMAGA, the world's influential producer of manufacturing equipment. Our company has worked for more than ten years - these are cycles of experience, which are described in the quality of merchandises and personalseparate attention to each buyer. We respect everyone, who cooperated with us - thus, our regular buyers obtain the most flexible purchase forms and discounts on the industrial equipment market. At this moment, there are more than 4000 such customers, and we constantly compose new agreements. More than 700 proceedings are resolved per day, because FAMAGA delivers all over the world Germany, United Kingdom, Venezuela, Yemen, Montenegro, Senegal, Djibouti, Nepal, Sri Lanka, Iran, Libya, Estonia, Honduras, Netherlands, Mongolia, Pakistan, Cameroon, Belarus, Rwanda, Vietnam, South Korea, El Salvador, Bolivia, Russia, Botswana, Nicaragua, North Korea, Mauritius, Philippines, Japan, Kiribati, Qatar, Burkina Faso, Uganda, Brunei, East Timor, Malaysia, Suriname, Haiti, Benin, Laos, Nigeria, Mexico, Luxembourg, India, Egypt, Antigua and Barbuda. A well-developed logistics chains and a partnership network let us to deliver our goods anywhere in the world quickly without undermining product quality.
A particular source of pride for FAMAGA is its personnel, each of whom contributes to our work. We accept into our team only experts, who already have experience in the range of industrial equipment.
All merchandises from FAMAGA are assured - we are responsible for the aftereffect of our work. Nowadays, more than 10 million units of products have been supplied, and this number is amounting every day. We are proud that users choose FAMAGA again and again, and we are pleased to make more exceptional and technologically developed industrial equipment so as stay in control.
To ask a question or make a request, contact us or write a message to the online chat on our official website. You can also dispatch a list of the required equipment to the email of organization - we will contact you ourselves with a prepared commercial proposal from FAMAGA.
Standards | ISO 15552 |
Compressed air connection | Internal thread |
Working pressure min./max. | 1,5 ... 10 bar |
Ambient temperature min./max. | -20 ... 80 °C |
Medium temperature min./max. | -20 ... 80 °C |
Medium | Compressed air |
Max. particle size | 50 µm |
Oil content of compressed air | 0 ... 5 mg/m³ |
Pressure for determining piston forces | 6.3 bar |
The pressure dew point must be at least 15 °C under ambient and medium temperature and may not exceed 3 °C . The oil content of compressed air must remain constant during the life cycle. Use only the approved oils from AVENTICS. Further information can be found in the “Technical information” document (available in the MediaCentre). |
Material |
---|
Cylinder tube | Aluminum, anodized |
Piston rod | Stainless steel |
Front cover | Die-cast aluminum |
End cover | Die-cast aluminum |
Seal | Polyurethane |
Nut for piston rod | Steel, galvanized |
Scraper | Polyurethane |
Tie-rods | Stainless steel Steel, galvanized |
See table for additional data on materials. |