We are not the manufacturer, authorised distributor or authorised representative of the Aventics (brand of Emerson) brand Worldwide. The private labels and part numbers shown on this website are the property of their respective owners.
Manufacturer
Aventics (brand of Emerson)
Country
Germany
Part number
R480041562
Description
Functional principle | double-acting |
Cushioning | elastic |
Magnetic piston | with magnetic piston |
Piston diameter | 40 mm |
Piston rod thread | M12x1,25 |
Standardization | ISO 15552 |
Stroke | 100 mm |
Sealing material | Polyurethane |
Scraper | Polyurethane |
Compressed air connection | G 1/4 |
Compressed air connection type | Internal thread |
Stock availability:
On request
If you are questing Aventics (brand of Emerson) R480041562, get in touch with FAMAGA, the world's key provider of streamlined equipment. Our company has existed for more than ten years - these are cycles of experience, which are depicted in the quality of spare parts and private attention to each customer. We praise everyone, who collaborated with us - so, our regular purchasers accept the most convenient purchase forms and discounts on the industrial equipment market. At this time, there are more than 3500 such clients, and we constantly form new agreements. More than 650 proceedings are resolved per day, because FAMAGA operates all over the globe Germany, United Kingdom, Chad, Guinea, Romania, Georgia, Nicaragua, Cameroon, Estonia, Tanzania, Papua New Guinea, Albania, Cyprus, Gambia, Netherlands, The Bahamas, Ecuador, Mauritius, United Arab Emirates, Russia, Bolivia, Paraguay, Seychelles, Denmark, Kenya, Senegal, Cape Verde, Guatemala, Switzerland, Hungary, Finland, Morocco, Croatia, The Gambia, Niger, Suriname, Afghanistan, Bosnia and Herzegovina, Madagascar, Pakistan, Zambia, Indonesia, Mali, Ireland, South Korea, Rwanda, Dominica, Namibia. A well-built logistics link and a partnership network allow us to conduct our products anywhere in the world promptly without damaging product quality.
A particular source of dignity for FAMAGA is its staff members, each of whom contributes to our work. We propose into our team only specialists, who already have experience in the field of industrial equipment.
All products from FAMAGA are assured - we are responsible for the outcome of our work. Nowadays, more than 10 million units of products have been supplied, and this amount is growing every day. We are proud that purchasers choose FAMAGA again and again, and we are glad to make more exceptional and technologically developed industrial equipment so as stay in control.
To consult or order, phone us or send a message to the online chat on our official website. You can also send a list of the desirable equipment to the email of our company - we will contact you ourselves with a prepared commercial proposal from FAMAGA.
Standards | ISO 15552 |
Compressed air connection | Internal thread |
Working pressure min./max. | 1,5 ... 10 bar |
Ambient temperature min./max. | -20 ... 80 °C |
Medium temperature min./max. | -20 ... 80 °C |
Medium | Compressed air |
Max. particle size | 50 µm |
Oil content of compressed air | 0 ... 5 mg/m³ |
Pressure for determining piston forces | 6.3 bar |
The pressure dew point must be at least 15 °C under ambient and medium temperature and may not exceed 3 °C . The oil content of compressed air must remain constant during the life cycle. Use only the approved oils from AVENTICS. Further information can be found in the “Technical information” document (available in the MediaCentre). |
Material |
---|
Cylinder tube | Aluminum, anodized |
Piston rod | Stainless steel |
Front cover | Die-cast aluminum |
End cover | Die-cast aluminum |
Seal | Polyurethane |
Nut for piston rod | Steel, galvanized |
Scraper | Polyurethane |