We are not the manufacturer, authorised distributor or authorised representative of the Aventics (brand of Emerson) brand Worldwide. The private labels and part numbers shown on this website are the property of their respective owners.
Manufacturer
Aventics (brand of Emerson)
Country
Germany
Part number
R412020428
Description
Functional principle | double-acting |
Cushioning | elastic |
non-adjustable | |
Magnetic piston | with magnetic piston |
Piston diameter | 16 mm |
Piston rod thread | M6 |
Standardization | ISO 6432 |
Stroke | 320 mm |
Sealing material | Nitrile butadiene rubber |
Scraper | Thermoplastic polyurethane (TPU) |
ATEX optional | |
Compressed air connection | M5 |
Compressed air connection type | Internal thread |
Stock availability:
On request
If you are looking for Aventics (brand of Emerson) R412020428, contact FAMAGA, the world's leading producer of industrial equipment. Our company has existed for more than ten years - these are cycles of experience, which are depicted in the quality of spare parts and particular attention to each orderer. We respect everyone, who worked with us - thus, our regular consumers pick up the most convenient purchase conditions and discounts on the industrial equipment market. At this moment, there are more than 3500 such clients, and we constantly make new agreements. More than 700 agreements are achieved per day, because FAMAGA operates all over the globe Germany, United Kingdom, Namibia, Laos, Samoa, Seychelles, Paraguay, Syria, Turkey, Haiti, Indonesia, Moldova, Botswana, Burundi, Hungary, Bolivia, Yemen, Burkina Faso, Eritrea, Nepal, Angola, Bulgaria, Singapore, Iran, Qatar, Panama, Dominica, Turkmenistan, Kuwait, Zimbabwe, India, Afghanistan, Mozambique, Guyana, Mongolia, Egypt, Togo, Greece, South Sudan, Iraq, Cape Verde, El Salvador, Argentina, United Arab Emirates, Vietnam, Ireland, Jamaica. A well-shaped logistics network and a partnership network allow us to conduct our goods anywhere in the globe immediately without undermining product quality.
A special source of repute for FAMAGA is its personnel, each of whom contributes to our work. We propose into our team only professionals, who already have experience in the range of manufacturing equipment.
All goods from FAMAGA are verified - we are responsible for the outcome of our work. At the moment, more than 10 million units of products have been supplied, and this number is ascending every day. We are pleased that clients choose FAMAGA again and again, and we are pleased to make more exceptional and technologically developed industrial equipment so as not to lower the bar.
To get some advice or place an order, contact us or write to the online chat on our site. You can also send a list of the desirable equipment to the email of our company - we will contact you ourselves with a ready-made commercial proposal from FAMAGA.
Standards | ISO 6432 |
Certificates | ATEX optional |
Compressed air connection | Internal thread |
Working pressure min./max. | 1 ... 10 bar |
Ambient temperature min./max. | -20 ... 80 °C |
Medium temperature min./max. | -20 ... 80 °C |
Medium | Compressed air |
Max. particle size | 50 µm |
Oil content of compressed air | 0 ... 5 mg/m³ |
Pressure for determining piston forces | 6.3 bar |
The pressure dew point must be at least 15 °C under ambient and medium temperature and may not exceed 3 °C . The oil content of compressed air must remain constant during the life cycle. Use only the approved oils from AVENTICS. Further information can be found in the “Technical information” document (available in the MediaCentre). |
Clamping piece for magnetic field sensor necessary |
ATEX-certified cylinders with identification II 2G Ex h IIB T4 Gb / II 2D Ex h IIIB T135°C Db_X can be generated in the Internet configurator. The operating temperature range for ATEX-certified cylinders is -20 °C ... 50 °C. |
Material |
---|
Cylinder tube | Stainless steel |
Piston rod | Stainless steel |
Piston | Aluminum |
Front cover | Stainless steel, Electropolished |
End cover | Stainless steel, Electropolished |
Seal | Nitrile butadiene rubber |
Nut for cylinder mounting | Stainless steel |
Nut for piston rod | Stainless steel |
Scraper | Thermoplastic polyurethane (TPU) |
Guide bushing | Plastic |